Child pages
  • How to configure VPN on a M200SC - M215SC





Open VPN Configuration Guide

Summary:

This document is intended to assist the user in establishing a VPN tunnel using the Open VPN client. 



Limitations:

  • Only TUN support (no TAP)

  • Do not support Open VPN Server pushed Routes.

  • Exclusive to IPV4 (will not work with IPV6 or PPPoE).

  • Limited amount of Testing with different Open VPN configurations; highly recommend to adhere to provided Open VPN default config files for initial evaluation.

  • The filename of the VPN client config and certificates must be the same as the provided reference example.

  • Application of the VPN TAR and enable/disable the feature via the web will force a reboot. (This restriction will be removed and is currently undergoing testing).

** Above restrictions may be addressed as we further develop the feature and/or in response to customer feedback.



Operation:

  • Web status page will show state of VPN connection as well as VPN IP and Gateway IP.

  • Deskset MMI will show state of VPN connection as well as VPN IP and Gateway IP under Network Status.

  • It is important that that NTP or manual time is configured correctly so that the unit will have the correct date/time before VPN set-up. If the dates are mismatched this could invalidate the initial TLS handshake.

  • If VPN is enabled, but not connected, all traffic will continue to route via the LAN IP.

  • If VPN is enabled and connected, then all traffic will route via the VPN tunnel. ** The exception is the web server which will still be accessible via the LAN IP.



Open VPN Server Set-up:

  • Recommend a typical set up for VoIP phones.



Open VPN Phone Configuration - Web:

  • Open VPN can be enabled via the Network_Advanced web page.

  • The TAR file can be uploaded as shown below.

  • The unit will reboot whenever the Enable setting is modified and saved, or when a new TAR is uploaded.



Open VPN Phone Configuration - Provisioning:

  • Open VPN can be enabled via provisioning.

  • An example provisioning config file is attached "enable_openvpn.cfg"

Download: enable_openvpn.xml

 Click here to expand...
<?xml version="1.0" encoding="UTF-8"?>
<settings>
<network>
<vpn>
<enable>1</enable>
</vpn>
</network>
<file>
<vpn>
<advanced_config>file_url</advanced_config>
</vpn>
</file>
</settings>


Parameters

Possible values

Defaults

WebUI

WebUI page/section

Access Right

Exportable

<settings><network><vpn><enable>value</enable></vpn></network></settings>

0, 1
0

VPN Enable

New Section on NETWORK->Advanced->VPN

admin, superadmin

yes

<settings><file><vpn><advanced_config>value</advanced_config></vpn></file></settings>

file url (eg. http://myserver/openvpn_client.tar)





no



Open VPN Test Set-up:

  • Open VPN has been validated in the following test scenarios:


  • Open VPN using Public IP's



  • Open VPN with SIP Endpoint behind NAT



  • Open VPN with Endpoint and Server behind NAT



TAR File:

  • The TAR must include:

    • client.conf (root of the archive)

    • ca.crt (keys folder)

    • client.crt (keys folder)

    • client.key (keys folder)

  • The exact file names above must be used for the Device to function correctly.



Open VPN Server Generated Files:

  • The ca.crt, client.cert and client.key are all generated via the Open VPN server.

  • client.conf File:

    • A reference client.conf file has been attached "client.conf"
      Download: client.conf
    • The only parameter that you will need to modify is the remote server IP and port.
    • The product operation has been validated using the attached client.conf and server.conf files.
    • There are too many variations of parameters within the config files that have not been validated within the timeframe. Deviation from the supplied reference config files may result in unexpected behavior.
  • server.conf File:

    • A reference Open VPN server.conf file has been attached "server.conf"
      Download: server.conf
    • It should not be necessary to modify any parameters within this file.
    • The product operation has been validated using the attached client.conf and server.conf files.
    • There are too many variations of parameters within the config files that have not been validated within the timeframe. Deviation from the supplied reference config files may result in unexpected behavior.