To add and register a Snom phone to an innovaphone PBX is very easy. The PhoneLink for innovaphone app acts as a bridge between the PBX and Snom's cloud provisioning service SRAPS.
The PBX will automatically pass on all required settings to the PhoneLink for innovaphone app.
After you have followed these steps, the phones will be successfully registered to the innovaphone PBX and ready to make and receive calls.
SRAPS provisioning profiles are very useful to store setting parameters that apply to a group of phones, e.g. UI language, time zone, ring tone, admin password, etc.
We will also use SRAPS provisioning profiles to personalise outbound proxy settings (important to distinguish between on-premise and cloud PBX installations)
To create a new provisioning profile, log in to the SRAPS web portal with your user credentials and go to " Provisioning Profiles ":
Add new profile:
Provide a name for the provisioning profile and select the correct product family.
It is not possible to create a template for desk phones and DECT phones combined, since the setting parameters of both product families differ.
For our example we choose the D-Series from the drop-down menu, and we create the provisioning profile for a innovaphone cloud PBX installation.
SRAPS profiles can store more settings like Function Keys, BLFs, UI Customisation, HTTP users/passwords and many, many more.
More details and example configuration you can find in dedicated article:
More information about Provisioning Profiles you can find here:
Go to PhoneLink app in Innovaphone PBX. If you need help installing the app, please read this article.
Open the app and select the provisioning profile you want to use for your phones. Then click SAVE.
The registration and the assignment of new phones to users is done in the Users Admin section of the innovaphone PBX.
Go to Users Admin
Create new user account.
a) User Name
CONFIRM when done.
Go to the " Register phones " tab and chose " New phone registrations "
Select the manufacturer Snom from the drop down menu and click NEXT.
Select the category "IP Phone" and click NEXT.
Select one or more users and fill in the MAC addresses of the phones you want to assign to the user(s).
Click NEXT and FINISH to complete the phone provisioning.
The successful registration can be verified in PBX > Registration:
Or directly on the Phone Display by the green icon.