Content

Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Sv translation
languageen

You may be able to connect the audio clip connections on the PA1 to the 600ohm TEL/Tip and Ring connection on your amp, but it is not supported by Snom. Here is a detailed explanation from one of our customers, from a forum posting, that you can reference for guidance.


Info

The PA1 speaker outputs are driven by a 4 amp class D power amplifier, the output is 8 ohms. The speaker outputs should only be hooked up to a small 8ohm loud speaker.

Additionally, you can't hook up too many speakers or have very long wire runs because the amp is only 4 watts. The line-out on the PA1 will not work for similar reasons.
The line-out is misleading because it is not really a line level output like the type you would hook up to the line-in of an amplifier.

The Snom documentation clearly states the line-out and line-in on the PA1 are only to be used for configuration and setup. The Bogen amplifier is a telephone paging amplifier. It has a TEL/BAL input labeled Tip/Ring.
This is a 600ohm input designed to be hooked up to the paging output of a telephone system.
The Bogen also has a Music input which is a line level input designed to be hooked up to the line-out of an audio source. The outputs on the PA1 are not compatible with the inputs of the Bogen.
You can hook up the speaker outputs of the PA1 to the TEL/BAL input of the Bogen.
I have seen it work, but the fact is it is not intended to be hooked up this way and can cause problems. The solution is to use a device that will convert the 8ohm speaker output of the PA1 to the 600ohm TEL/BAL input of the Bogen.
The Radio Design Labs RDL - STP-1 Universal Audio Attenuator is designed exactly for this purpose.
Here is a link to the product page and datasheet.
https://www.rdlnet.com/product.php?page=26
https://www.rdlnet.com/downloads/datasheets/stp-1.pdf
This is the device that will allow you to correctly hook up the Snom PA1 to almost any paging system or paging amplifier.
The datasheet has hookup diagrams for connecting different inputs to different outputs.
You can convert the 8ohn speaker output of the PA1 to a 600ohm input for use with most telephone paging amplifiers.
You can convert the 8 ohm speaker output to a line level and hook it up to any amplifier with line level inputs.
It is quite a versatile little device for the $50.00 or $60.00 USD price tag.


Info

Some customers have reported success using the RDL TX-8a when connecting the PA1 to a line level input on an external amplifier.



Include Page
Howto Footer - uni-en
Howto Footer - uni-en

Content by Label
showLabelsfalse
max20
spacesPW
showSpacefalse
sorttitle
typepage
cqllabel = "deskphone" and label = "kb-troubleshooting-article" and type = "page"
labelsdect dect-multicell


Sv translation
languagede

Möglicherweise können Sie die Audioclip-Anschlüsse am PA1 mit der 600 Ohm TEL/Tip und Ring-Verbindung an Ihrem Verstärker verbinden, aber Snom unterstützt dies nicht. Hier ist eine detaillierte Erklärung von einem unserer Kunden, von einem Forenbeitrag, den Sie zur Orientierung heranziehen können.


Info

Die PA1-Lautsprecherausgänge werden von einer 4-Ampere-Class-D-Endstufe angesteuert, der Ausgang ist 8 Ohm. Die Lautsprecherausgänge sollten nur an einen kleinen 8-Ohm-Lautsprecher angeschlossen werden.

Außerdem können Sie nicht zu viele Lautsprecher anschließen oder sehr lange Kabelwege haben, da der Verstärker nur 4 Watt leistet. Der Line-Out des PA1 wird aus ähnlichen Gründen nicht funktionieren.

Die Bezeichnung Line-Out ist irreführend, da es sich nicht wirklich um einen Line-Pegel-Ausgang handelt, wie man ihn an den Line-In eines Verstärkers anschließen würde.


In der Snom-Dokumentation steht eindeutig, dass der Line-Out und Line-In am PA1 nur für die Konfiguration und das Setup verwendet werden sollen. Der Bogen-Verstärker ist ein Telefon-Durchsageverstärker. Er hat einen TEL/BAL-Eingang, der mit Tip/Ring beschriftet ist.

Dies ist ein 600-Ohm-Eingang, der für den Anschluss an den Paging-Ausgang einer Telefonanlage vorgesehen ist.


Der Bogen hat auch einen Musikeingang, der ein Line-Pegel-Eingang ist, der für den Anschluss an den Line-Ausgang einer Audioquelle vorgesehen ist. Die Ausgänge des PA1 sind nicht mit den Eingängen des Bogens kompatibel. Sie können die Lautsprecherausgänge des PA1 mit dem TEL/BAL-Eingang des Bogens verbinden.


Ich habe gesehen, dass es funktioniert, aber Tatsache ist, dass es nicht dafür gedacht ist, auf diese Weise angeschlossen zu werden und Probleme verursachen kann. Die Lösung ist, ein Gerät zu verwenden, das den 8 Ohm Lautsprecherausgang des PA1 auf den 600 Ohm TEL/BAL-Eingang des Bogens umsetzt.

Der Radio Design Labs RDL - STP-1 Universal Audio Attenuator ist genau für diesen Zweck konzipiert.

Hier ist ein Link zur Produktseite und zum Datenblatt. - http://www.rdlnet.co...uct.php?page=26 - http://www.rdlnet.co...heets/stp-1.pdf 

Mit diesem Gerät können Sie das Snom PA1 korrekt an fast jede Durchsageanlage oder jeden Durchsageverstärker anschließen.

Das Datenblatt enthält Anschlussdiagramme für den Anschluss verschiedener Eingänge an verschiedene Ausgänge.


Sie können den 8-Ohm-Lautsprecherausgang des PA1 in einen 600-Ohm-Eingang umwandeln, um ihn mit den meisten Telefon-Rufverstärkern zu verwenden.

Sie können den 8-Ohm-Lautsprecherausgang in einen Line-Pegel umwandeln und ihn an jeden Verstärker mit Line-Pegel-Eingängen anschließen.

Für den Preis von $50,00 oder $60,00 USD ist es ein ziemlich vielseitiges kleines Gerät.


Info

Einige Kunden haben berichtet, dass sie den RDL TX-8a erfolgreich einsetzen, wenn sie den PA1 an einen Line-Pegel-Eingang eines externen Verstärkers anschließen.


Include Page
Howto Footer - de
Howto Footer - de

Content by Label
showLabelsfalse
max20
spacesPW
showSpacefalse
sorttitle
typepage
cqllabel = "deskphone" and label = "kb-troubleshooting-article" and type = "page"
labelsdect dect-multicell