|ActiveBluetoothConnection||Phone has an bluetooth device connected.|
|ActiveLocations||Current active locations for Broadsoft.|
The phone is hiding its Outgoing Identity.
|AudioDeviceIsHeadset||Headset is used as sound device.|
|AudioDeviceIsSpeaker||Speaker is used as sound device.|
During calls: mute was pressed so no audio is being transmitted to the other party.
On incoming calls: mute was pressed so ringtone won't be played.
|BtoeStatePairing||Lync UC edition FW only: BToE state is pairing.|
|BtoeStateUnpaired||Lync UC edition FW only: BToE state is unpaired. |
|CallBackOnBusyAvailable||Lync UC edition FW only: callback on busy is available.|
|CallBackOnBusyInProgress||Lync UC edition FW only: call on busy (CoB) is in progress.|
|CallForPickupAvailable||A call pickup is available. |
A call is canceled.
|CurrentIdentityForewardsAfterTimeout||The currently selected identity has activated call forwarding after timeout.|
|CurrentIdentityForewardsAlways||The currently selected identity has activated general call forwarding.|
|CurrentIdentityForewardsWhenBusy||The currently selected identity has activated call forwarding when user is busy.|
|CurrentIdentityHasTextMessages||The PBX has at least one text message for the currently selected identity.|
|CurrentIdentityHasVoiceMessages||The PBX has at least one voice message for the currently selected identity.|
|CurrentIdentityIsDnd||The currently selected identity is set to not receive calls.|
|CurrentIdentityIsNotRegistered||The currently selected identity is not registered.|
The Broadsoft feature Silent Alerting is enabled.
|DateOngoing||Lync UC edition FW only: Info regarding an appointment in ongoing which is provided via Exchange Web Services.|
|DateReminding||Lync UC edition FW only: A reminder regarding an appointment which is provided via Exchange Web Services.|
|DfksFailed||Device Feature Key Synchronization (DFKS) subscription failed.|
|EmergencyCallNumbersMisconfigured||The emergency call numbers are misconfigured.|
|EthernetUnplugged||The network cable was unplugged.|
|ExpDeviceCabelingBroken||No connection to a D3/D7.|
|ExpDeviceLimitExceeded||Too many D3/D7 connected.|
|FirmwareUpdateFailed||The last attempt to apply a firmware update failed.|
|HidConnected||An USB HID device is connected. |
|HidConnecting||An USB HID device tries to connect. |
Lync UC edition FW only: Due to an outage (e.g. network issue) with central Lync services phone switched in Branch Appliance Resiliency mode on the SBA (survivable-branch-appliance). In this mode only limited functionality is available. Phone calls will work, but Presence, CF etc. might not work.
|Identity<01...12>IsNotRegistered||The n-th identity is not registered (whereas <n> can be 01..12).|
|IPv4Conflict||The IPv4 address conflict detection encountered an error. |
|LocationRetrievalFailed||Lync UC edition FW only: Provides a E.911 related Location Disclaimer / Warning if the location could not be retrieved.|
The phone’s monitored extension is ringing.
|PhoneCannotReachNtpServer||The phone failed to reach the NTP server (system time might be wrong). |
|PhoneHasDisabledSipStack||The phone cannot make calls due to a Snom device license issue. |
|PhoneHasFirmwareUpdate|| A firmware update has been received and is ready to install.|
|PhoneHasIncomingPublicAnnouncement||An incoming public announcement (PA) is being played. |
There is not much free memory left on the phone. This may cause strange side effects.
|PhoneHasMissedCalls||There are missed calls.|
|PhoneHasNoAdminPassword||The admin mode of the phone is not password protected. |
|PhoneHasNoHttpPassword||The web interface of the phone is not password protected.|
|PhoneHasTextMessages||The PBX has text messages for at least one configured identity.|
|PhoneHasVoiceMessages||The PBX has voice messages for at least one configured identity.|
|PhoneHasVpnError||A VPN error has occurred.|
|PhoneIsLocked||The phone's keyboard is locked.|
|PhoneIsWaitingForCallCompletion||Call completion is active and phone waits for notification of remote party to be available again.|
|PhoneKnowsCallCanBeCompleted||Call completion is active and phone received a notification that the call can now be completed.|
|PhoneProvisioningFailed||The phone's provisioning process failed.|
|PhoneProvisioningInProgress||The phone's provisioning process is in progress (retry counts).|
|PhoneProvisioningStarting||The phone is starting the provisioning process.|
|PhoneRefusedHugeXcapSync||A remote address book is refused to be synchronized via XCAP protocol, because it's too big.|
|PhoneWaitsOnNtpServer||The phone is attempting to reach the configured NTP server. |
|PhoneWantsReboot||A reboot is required, e.g. to apply setting changes.|
|PhoneWantsToUpdate||The phone asks for an update.|
The phone is in Silent Mode.
The Broadsoft feature Remote Office is enabled.
|ServerMessageToBeShownDirectly||The PBX did provide a message to be displayed on the phone right away.|
The Broadsoft feature Simultaneous Ringing is enabled.
The phone received a SIP Warning Message.
|StatusLineSystemMessage ||Phone internal status or error messages that should be displayed in the status line.|
Serial Expansion Module is connected.
The phone / user tries to park a call.
|UsbDiskConnected||Phone has an usb storage device connected.|
|UxmConnected||A D3 or D7 USB extension board is connected.|
A USB expansion Module requires an FW update.
|VisionConnectionLost||The network connection between the phone and a paired Vision has been lost. |
The phone has an active VPN connection.
|WlanActive||The Phone is connected over a Wi-Fi network.|