D865 on snomD865-SIP 10.1.141.13 keeps reporting "Warning: phone has no admin password" but we've configured usernames and passwords everywhere. Any idea?
Hi, yes there is a "hidden" (not present in the web interface) admin password, you can change it only via provisioning. The setting is:
<admin_mode_password perm="">1234</admin_mode_password>This will be fixed in future firmware release.
Thanks! How do I set it without changing / breaking any of the other settings which I've already made and what is it for?
Hi, if you have SRAPS, you can add the phone and add only the admin_mode_password parameter. Otherwise, if the phone is under autoprovisioning, add the admin_mode_password to the provisioning template.
Thanks a lot. Right now, we have manually configured the phones by going through the built-in web interface. How do we resolve the issue?
If you have a SRAPS account, you can add the phone to SRAPS, add the parameter and restart the phone. Otherwise you can create a configuration file with only admin_mode_password inside and use it for the phone provisioning. The last solution is to clear the warning and wait for a future firmware to add the parameter to the web interface.
Federico Rossi Just to clarify: Do I create an XML file with only that single line in it
put it on a server somewhere and point the provisioning URL towards the file?
Or do I have to create any sort of boilerplate XML around the line? If so, can you probably provide the complete content?
Supported PBX systems
DECT Multicell Installation
Create a support ticket
Report defective hardware
Remove MAC address from SRAPS
Copyright © 2023 Snom Technology GmbH. All rights reserved.
Firmware Update Center PBX Partner PBX Deployment How-to Security and Privacy DECT Multicell Installation
Home FAQ How To Warranty
Audio conference devices
More service from Snom