Child pages
  • How to use snom DECT devices including snom A190 with 3CX WebClient?

Contents

In order to use the web client with Snom DECT M-Series equipment, a few minor adjustments to the 3CX system are required.


Please follow the steps listed here:

  1. Add the desired device to the list of phones supporting UA CSTA M700 and M900, see picture below.

  2. As a result, you will see the on the right corner of the WebClient page M700

  3. Now you can start a call using you WebClient

 

Note: There is a difference to desk phones.

In this case, your handset/headset will first ring and when you press the OK button the call will be routed to the dialled number.