Skip to main content
assistive.skiplink.to.breadcrumbs
assistive.skiplink.to.header.menu
assistive.skiplink.to.action.menu
assistive.skiplink.to.quick.search

Skip to end of banner Go to start of banner

PA1 - Firmware

Created by Simon Eckmiller on Oct 28, 2022

On this page you will find the firmware for our PA1 announcement system.

08.7.5.75 MRU PA1

Further Information

Related articles

Page:

Connecting The PA1 to Relays for Door Phone Applications
Page:

How to activate a PA1 PIN when the device receives a call
Page:

How To Configure Multicast Paging
Page:

How to connect to the PA1's Default IP Address 192.168.0.2
Page:

How to decrease/increase audio output volume of the PA1 and PA1+
Page:

How to play a tone before announcement on a PA1
Page:

How to start a call from the PA1 using the keyboard inout PINs
Page:

PA-1 Door Phone Application
Page:

Snom PA1 TFTP Recovery Procedure
Page:

Snom PA1+/PA1P TFTP Recovery Procedure
Page:

Using Microsoft Task Scheduler to Run Script Daily to use PA1 as Bell or Ringer
Page:

What can you do with a PA1

About Snom:

Resources

Declaration of Conformity

Knowledge Base

Warranty information

Products

Wireless Phones

Location Gateways

Audio conference devices

Public Announcement Devices

About Snom

Ressources

Knowledge Base

Products

Mehr Service von Snom

More service from Snom

Mehr Service von Snom

Copyright © 2024 Snom Technology GmbH. All rights reserved.