broadsoft_failover_plan

D-SERIES

Web User Interface

N/A

Phone User Interface

N/A

Initial Firmware Version

10.1.140.0

XML Configuration

<broadsoft_failover_plan perm="PERMISSIONFLAG">VALIDVALUE</broadsoft_failover_plan>

Description

This setting determines which release of BroadWorks SIP Phone Interoperability Test Plan to be used as the failover/failback requirements.

Valid Values

R22 - meets Broadsoft R22 Failover requirements

R23 - meets Broadsoft R23 Failover requirements

Default Value

R22

Please note:

For a full failover and recover / fall back experience under Broadsoft R23 Failover requirements & conditions its adviced to adjust the following settings to:

• sip_failover_response = 503 Service Unavailable
• broadsoft_failover_plan = R23
• sip_request_timeout1 = 24 (for failover time = 11.5sec, 32 for failover time = 15.5sec) 
• dirty_host_ttl = 300 (for failback time = 5min)

This should provide a good start line, but of course environment specific adjustment of these settings might be required.