Content
Network → Basic→ IPv4 → Manually Configure DNS
Model | Phone User Interface |
---|---|
C620 | Status & Settings → Admin settings → Network setting → IPv4 → Set Static DNS → Static DNS |
M100 | Admin Settings → Network setting → IPv4 → Set Static DNS → Static DNS |
M200 | Admin Settings → Network setting → IPv4 → Set Static DNS → Static DNS |
M500 | N/A |
network.ip.manually_configure_dns = VALIDVALUE
<network>
<ip>
<manually_configure_dns>VALIDVALUE</manually_configure_dns>
</ip>
</network>
Enable or disable manual DNS configuration for IPv4.
M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.
0 (disable), 1 (enable)
0