network.ip.mode

C620 M100 M200 M500

Network → Basic→ IPv4 → Radio button options (Disable, DHCP, Static IP, PPPoE)

Model	Phone User Interface
C620	Status & Settings → Admin settings → Network setting → IPv4 → Mode
M100	Admin Settings → Network setting → IPv4 → Mode
M200	Admin Settings → Network setting → IPv4 → Mode
M500	N/A

network.ip.mode = VALIDVALUE

<ip>

<mode>VALIDVALUE</mode>

</ip>

</network>

Sets the IPv4 network mode.

M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.

disable, dhcp, static, pppoe

dhcp