network.ip6.prefix

C620 M100 M200 M500

Network → Basic→ IPv6 → Prefix (0-128)

Model	Phone User Interface
C620	Status & Settings → Admin settings → Network setting → IPv6 → Set Static IP → Prefix
M100	Admin Settings → Network setting → IPv6 → Set Static IP → Subnet Mask
M200	Admin Settings → Network setting → IPv6 → Set Static IP → Prefix
M500	N/A

network.ip6.prefix = VALIDVALUE

<ip6>

<prefix>VALIDVALUE</prefix>

</ip6>

</network>

If setting network.ip6.mode is static, enter the IPv6 address prefix length in bits.

M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.

0–128

64