Content
Model | Web User Interface |
---|---|
C520 C620 M100 M500 | Servicing → Provisioning → Resynchronization → Bootup Check |
M200 | Configuration → Provisioning → Resynchronization → Bootup Check |
N/A
provisioning.bootup_check_enable = VALIDVALUE
<provisioning>
<bootup_check_enable>VALIDVALUE</bootup_check_enable>
<provisioning>
Enables or disables bootup check for configuration and firmware files.
M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.
0 (disabled), 1 (enabled)
1