Content
Model | Web User Interface |
---|---|
C520 C620 M100 M500 | Servicing → Provisioning → Resynchronization → End Hour |
M200 | Configuration → Provisioning → Resynchronization → End Hour |
N/A
provisioning.weekdays_end_hr = VALIDVALUE
<provisioning>
<weekdays_end_hr>VALIDVALUE</weekdays_end_hr>
</provisioning>
Sets the hour when the device stops checking for new firmware and/or configuration files.
M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.
0–23
0