Content
Page History
...
Identity - Features (Tab) - General (Section): Disconnect On-hook
Phone User Interface
N/A
Initial Firmware Version
N/A
XML Configuration
<conf_hangup perm="PERMISSIONFLAGS">VALIDVALUE</conf_hangup>
Description
Sometimes it is useful to keep the local conference connected with all parties when the headset or the handset is placed on hook, but only switching to speaker audio instead.
on: the onhook event is handled as configured by the cancel_conference setting
FIRMWARE HISTORY
from 8.4: When enabled, see cancel_conference, otherwise only the audio device switches between on-hook/off-hook.
from 8.7: Splitted from global to identity-based
Description
When the handset or headset is placed on-hook during a call, and this setting is enabled, that call gets disconnected (as configured by setting cancel_conference), otherwise that call remains connected only off: the audio device changes to handsfree mode (speaker).
DEPENDENCIES
Valid Values
- on
- off
Default Value
- off
Overview
Content Tools
Tasks
