Release Date: 27 June 2019

Known issues and limitations:

Changelog

Changes since release version 10.1.37.11

New features:

SAP-314: New support for SIP warning header with setting: sip_header_warning & sip_header_warning_codes, - also see RFC 3261 section 20.43 [SCPP-6859]
SAP-409: New setting ipv6_over_ipv4, allowing to prefer IPv6 over IPv4 with default=on [SCPP-6380]
SAP-930: For intercom_connect_type a new value is introduced intercom_connect_type_active_device and the setting efficiency is corrected (desired handset, headset, handsfree are again applied as expected) [SCPP-7612]
SAP-1276: New feature code combo-support, for concatenations of a prefix input (can be key programmed with argument number=incomplete, see speed) with BLF key, or SpeedDial, or TransferTo number (e.g. *80+100 dials *80100) [SCPP-7887]
SAP-1292: The phone did set the BLF state too early into "Ringing" if the NOTIFY contains the sip.rendering parameter [SCPP-7898]
SAP-2629: New consolidated firmware update for Feature:Auto Provisioning, simplifying the 2-step process that required an extra config-file for the firmware download URL
SAP-3251: New setting session_timer_refresh_method_force_invite allowing to define the method used by the SIP session timer
SAP-3258: A new dialog in maintenance menu "Sync Settings" supports the user to trigger an ad hoc settings-synchronisation via PUI, see Settings -> Maintenance -> Synchronize Settings
SAP-3412: Phones can now handle the Remote-Party-ID SIP header, - also see draft-ietf-sip-privacy-00 / 5.1 and the new setting: contact_source_sip_priority [SCPP-8793]
SAP-3413: Improved and extented handling of source for CLI, Caller ID with new setting: contact_source_sip_priority [SCPP-8792]
SAP-3443: New support for SNMP OID 1.3.6.1.2.1.47.1.1.1.1.11 entPhysicalSerialNum (Snom MAC address), - also see HowTo:[SNMP] [SCPP-8801]
SAP-3449: New ability to use directory to perform an outgoing call when current active line is configured as SLA
SAP-3459: New BLF and LineKey auto assignment, see fkey_auto_assign_behavior, fkey_blf_auto_assign_enable, fkey_blf_auto_assign_start, fkey_line_auto_assign_enable and fkey_line_auto_assign_start
SAP-3465: New setting keep_provisioning_url_after_reboot supports to clear or retain update_server (DHCP option 66) and update_filename (DHCP option 67) after a reboot , also see DHCP options
SAP-3537: New option for blind transfer, "release on REFER" if release_xferred_call_on is undefined, to support instant transfers that do not depend on any responses, Note: this also auto-applies for (considered) invalid responses

Improvements and modifications:

SAP-2139: The monitor calls context-sensitive fkey (F_DIALOG) can be displayed and does work even if no BLF subscription is active/working
SAP-2601: Improved readability by drawing of list elements in the idle screen with rounded rectangles
SAP-2720: Adjusted display brightness @D717
SAP-3306: If a contact is added using the WUI call history (nameadd= function in the /index.htm) the Display Name is now autofilled into Nickname field when /adr.htm is loaded
SAP-3414: The [XML minibrowser] does now accept multiple line breaks [SCPP-8787]
SAP-3424: Inside directory at contact details the first number that can be dialed is now preselected and the call can be instantly initiated with "OK / checkmark" key
SAP-3470: New default value for ntp_server = 192.53.103.104 pool.ntp.org
SAP-3483: Added option custom melody for the Alert Internal/External/Group ringer in web-interface (/preferences_audio.htm) [SCPP-8853]
SAP-3595: The default value for contact_source_sip_priority is now: PAI RPID FROM to enable out-of-the-box the recently added Remote-Party-ID SIP header support (see SAP-3412 & SAP-3413 above)
SAP-3599: LDAP encoding has been improved for strict ASN.1 parser requirements

Corrections:

SAP-281: For the runtime variable $local the local identity username was used (NOK since 8.7.5.x) instead of called number (OK in 8.7.4.x) [SCPP-6470]
SAP-308: An %23 (# sign) in the From header was leading the phone to perform a malformed LDAP search request [SCPP-6825]
SAP-1059: Reprovisioning the same XML definition was leading to a subscription dialog removal and re-creation [SCPP-7193]
SAP-1400: The nickname of directory entries is now shown on incoming call, ringing, connected, disconnected and call history (top level) [SCPP-7967]
SAP-2457: The SLA SUBSCRIBE is now send immediately after the user_shared_line is toggled (on/off)
SAP-2527: When receiving Motion JPEG the transparency of the UI elements is now auto adjusted for all color display models
SAP-3207: For backward compatibility reasons a legacy digest authorization header with "sip:" in the uri tag, is now again available when the new setting legacy_digest_auth_behavior is enabled [SCPP-8707]
SAP-3346: When the user was browsing a phone menu, pressing DND triggered the execution of Action URL for DND (or DND off) if configured, but the local phones status was not changed to DND (on/off)
SAP-3423: The CallerID and Label for Call pickup using buttons was not working [SCPP-8809]
SAP-3440: The caller picture / photo-ID wasn't displayed if the image URL contains a plus sign (was not encoded to %2b in the phone's web client request) #Crown
SAP-3466: Phone added whitespaces in the WWW-Authenticate qop parameter with TR-069 protocol, also see HowTo:Full Endpoint Management [SCPP-8839]
SAP-3471: In the phone web user interface (WUI: /index.htm) the call history was always in UTC time, it is now aligned with timezone selected for PUI
SAP-3477: The XCAP authentication challenge handling was broken, the user was only asked for credentials on first request but not subsequent ones and even not on a 401 Unauthorized
SAP-3489: Sometimes the DTMF-inband-support did stop after approximately 24 days, SIP INFO user_dtmf_info was not affected #Asterisk #3CX [SCPP-8745]
SAP-3497: The AOC-D value was covered by other text in connected screen, also see setting: aoc_amount_display
SAP-3510: Any idle-screen-gui_fkey (1-4) functionality defined by XML definition always took precedence/did overlay any context sensitive key on that pos. in other screens, e.g. in call history the details soft key
SAP-3516: In WUI directory (/adr.htm) existing contact entries that have special characters (like ä,ö,ü,ß) were shown (and therefore stored) in encoded form when attempting an edit, (e.g. Maëlle Süß was shown as Ma&#235lle S&#252&#223) [SCPP-8870]
SAP-3543: In WUI (/index.htm) it was impossible to change the Outgoing Identity as long as JavaScript support is enabled in users web browser, by JS support the value was always reset to current ID
SAP-3546: In WUI (/fkey.htm) if an fkey is configured with XML definition (Number is filled with XML, but remarkably in encoded form) any additional Apply (manually/auto by JS support) did led to a inoperable fkey (due to kind of a type-reset to Action URL) [SCPP-8879]
SAP-3547: In 802.1x EAP-TLS (Radius / NPS) environments, the download for WPA configuration .tar file did fail @D735, D717, D335 - Also note the new general default value for prov_back_off_timer=3,6:3600 [SCPP-8837]

Other changes:

SAP-3117: Only valid numbers and valid values will be accepted when entered for SIP, Mobile, Landline, Home, Business, Extension using the phone-user- (PUI) or the web-user-interface (WUI)
SAP-3506: If a desired firmware version for an update is already matching the one running on the phone no update is performed