Scheduled maintenance alert

Our website will undergo maintenance today on April 22, between 20:00 CET and 23:00 CET, which may cause occasional service disruptions and downtime. We apologize for any inconvenience and appreciate your understanding.

Snom Service Hub

Content

Page tree

C520 C620 M100 M200 M500

Web User Interface

ModelWeb User Interface
C520
C620
M100
M500

Servicing → Provisioning → Resynchronization → Schedule Check → Radio button options (Disable, Interval, Days of the Week)

M200

Configuration → Provisioning → Resynchronization → Schedule Check → Radio button options (Disable, Interval, Days of the Week)

Phone User Interface

N/A

Text Configuration

provisioning.schedule_mode = VALIDVALUE

XML Configuration (C520, C620, M100, M200 only)

<provisioning>

<schedule_mode>VALIDVALUE</schedule_mode>

</provisioning>

Description

Sets the type of schedule check for configuration and firmware files.

If set to "weekday", you must also configure the settings provisioning.weekdays, provisioning.weekdays_start_hr, and provisioning.weekdays_end_hr.

M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.

Valid Values

disable, interval, weekday

Default Value

ModelDefault Value
C520interval
C620
M100
M200
M500		disable