Content
Dear community,
I have: VDSL access with dyn. public IP <=> Fortigate FG81F <=> Snom M200SC, SIP client connected with SIP server by 1&1.
First registration of the M200 SIP clients are working well. Firewall rules are okay. Calls in both direction incl. voice streams are working.
After a change of the dyn. IP address (new 46.142.150.27) I see in a trace that the 1&1 STUN server replys with the new external IP. But the M200SC SIP client uses for SIP communication the old IP (here 46.142.151.25).
Result: SIP client is not reachable for incoming call. Perhaps 1&1 SIP server uses wrong destination address.
Are there any paramters to change this behavior? My SIP config below at the end.
192.168.2.10 local IP of M200SC
212.227.67.33 1&1 STUN server
No. Time Source Destination Protocol Length Info 1 0.000000 192.168.2.10 212.227.67.33 STUN 70 Binding Request
cut
No. Time Source Destination Protocol Length Info 3 0.022693 212.227.67.33 192.168.2.10 STUN 130 Binding Success Response MAPPED-ADDRESS: 46.142.150.27:65516 XOR-MAPPED-ADDRESS: 46.142.150.27:65516
Session Traversal Utilities for NAT [Request In: 1] [Time: 0.022693000 seconds] Message Type: 0x0101 (Binding Success Response) Message Length: 68 Message Cookie: 2112a442 Message Transaction ID: f915df971142ed6b820abaeb [STUN Network Version: RFC-5389/8489 (3)] Attributes MAPPED-ADDRESS: 46.142.150.27:65516 Attribute Type: MAPPED-ADDRESS Attribute Length: 8 Reserved: 00 Protocol Family: IPv4 (0x01) Port: 65516 IP: 46.142.150.27 SOURCE_ADDRESS (Deprecated): 212.227.67.33:3478 Attribute Type: SOURCE_ADDRESS Attribute Length: 8 Reserved: 00 Protocol Family: IPv4 (0x01) Port: 3478 IP: 212.227.67.33 CHANGED_ADDRESS (Deprecated): 212.227.67.34:3479 Attribute Type: CHANGED_ADDRESS Attribute Length: 8 Reserved: 00 Protocol Family: IPv4 (0x01) Port: 3479 IP: 212.227.67.34 XOR-MAPPED-ADDRESS: 46.142.150.27:65516 Attribute Type: XOR-MAPPED-ADDRESS Attribute Length: 8 Reserved: 00 Protocol Family: IPv4 (0x01) Port (XOR-d): defe [Port: 65516] IP (XOR-d): 0f9c3259 [IP: 46.142.150.27] SOFTWARE Attribute Type: SOFTWARE Attribute Length: 16 Software: Vovida.org 0.97
No. Time Source Destination Protocol Length Info 5 5.697045 192.168.2.10 212.227.124.129 SIP 841 Request: OPTIONS sip:212.227.124.129:5060 |
Session Initiation Protocol (OPTIONS) Request-Line: OPTIONS sip:212.227.124.129:5060 SIP/2.0 Message Header Accept: application/reginfo+xml, application/rlmi+xml, application/sdp, application/simple-message-summary, application/watcherinfo+xml, message/sipfrag, multipart/mixed Via: SIP/2.0/UDP 46.142.151.25:65516;branch=z9hG4bKd77ed43c1cb12d11d;rport Transport: UDP Sent-by Address: 46.142.151.25 Sent-by port: 65516 Branch: z9hG4bKd77ed43c1cb12d11d RPort: rport Route: <sip:sip.1und1.de;lr> Max-Forwards: 70 From: "xxxxxx" <sip:xxxxxxx@sip.1und1.de>;tag=b7a177c9bb To: <sip:212.227.124.129:5060> Call-ID: ce844fe6cd9a4186 [Generated Call-ID: ce844fe6cd9a4186] CSeq: 1270186431 OPTIONS Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, SUBSCRIBE, UPDATE Allow-Events: refer Contact: <sip:xxxxxxx@sip.1und1.de;gr=urn:uuid:963e898d-8e45-4a34-88cb-000413641AF6> Supported: eventlist, gruu, join, replaces, sdp-anat, timer User-Agent: snomM200SC/2.11.0.4-0 Content-Length: 0
No. Time Source Destination Protocol Length Info 6 5.718627 212.227.124.129 192.168.2.10 SIP 407 Status: 200 OK |
Status-Line: SIP/2.0 200 OK Message Header Via: SIP/2.0/UDP 46.142.151.25:65516;branch=z9hG4bKd77ed43c1cb12d11d;rport=65516;received=46.142.150.27 Transport: UDP Sent-by Address: 46.142.151.25 Sent-by port: 65516 Branch: z9hG4bKd77ed43c1cb12d11d RPort: 65516 Received: 46.142.150.27 From: "xxxxxx" <sip:xxxxx@sip.1und1.de>;tag=b7a177c9bb To: <sip:212.227.124.129:5060>;tag=9fca323d66201399418559aa37dc2bce.6114ada2 Call-ID: ce844fe6cd9a4186 [Generated Call-ID: ce844fe6cd9a4186] CSeq: 1270186431 OPTIONS Server: UI Kamailio Content-Length: 0
For the re-registration of SIP after 7200s the wrong (old) IP address is used too:
No. Time Source Destination Protocol Length Info 156 696.194558 192.168.2.10 212.227.124.130 SIP 1079 Request: REGISTER sip:sip.1und1.de (1 binding) |
Frame 156: 1079 bytes on wire (8632 bits), 1079 bytes captured (8632 bits)
Session Initiation Protocol (REGISTER) Request-Line: REGISTER sip:sip.1und1.de SIP/2.0 Method: REGISTER Request-URI: sip:sip.1und1.de Request-URI Host Part: sip.1und1.de [Resent Packet: False] Message Header Accept: application/reginfo+xml, application/rlmi+xml, application/sdp, application/simple-message-summary, application/watcherinfo+xml, message/sipfrag, multipart/mixed Via: SIP/2.0/UDP 46.142.151.25:5200;branch=z9hG4bK048eabd8ce464722b;rport Transport: UDP Sent-by Address: 46.142.151.25 Sent-by port: 5200 Branch: z9hG4bK048eabd8ce464722b RPort: rport Route: <sip:sip.1und1.de;lr> Route URI: sip:sip.1und1.de;lr Route Host Part: sip.1und1.de Route URI parameter: lr Max-Forwards: 70 From: "49xxxx" <sip:49xxxx@sip.1und1.de>;tag=bd623da2b9 SIP from display info: "49xxxx" SIP from address: sip:49xxxx@sip.1und1.de SIP from address User Part: 49xxxx SIP from address Host Part: sip.1und1.de SIP from tag: bd623da2b9 To: "49xxxx" <sip:49xxxx@sip.1und1.de> SIP to display info: "49xxxx" SIP to address: sip:49xxxx@sip.1und1.de SIP to address User Part: 49xxxx SIP to address Host Part: sip.1und1.de Call-ID: df2c05cdc819c81a [Generated Call-ID: df2c05cdc819c81a] CSeq: 1269400380 REGISTER Sequence Number: 1269400380 Method: REGISTER Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, SUBSCRIBE, UPDATE Allow-Events: refer Authorization: Digest username="49xxxx",realm="1und1.de",nonce="xxxx",uri="sip:sip.1und1.de",response="xxxx" Authentication Scheme: Digest Username: "49xxxx" Realm: "1und1.de" Nonce Value: "xxxx" Authentication URI: "sip:sip.1und1.de" Digest Authentication Response: "xxxx" Contact: <sip:49xxxx@46.142.151.25:5200;transport=udp>;expires=7200;reg-id=1;+sip.instance="<urn:uuid:963e898d-8e45-4a34-88cb-000413641AF6>" Contact URI: sip:49xxxx@46.142.151.25:5200;transport=udp Contact URI User Part: 49xxxx Contact URI Host Part: 46.142.151.25 Contact URI Host Port: 5200 Contact URI parameter: transport=udp Contact parameter: expires=7200 Contact parameter: reg-id=1 Contact parameter: +sip.instance="<urn:uuid:963e898d-8e45-4a34-88cb-000413641AF6>"\r\n Supported: eventlist, gruu, join, replaces, sdp-anat User-Agent: snomM200SC/2.11.0.4-0 Content-Length: 0
M200:
| Modell: | M200SC |
| Seriennummer: | CHNLB31031800454 |
| Software-Version: | 2.11.0.4 |
| V-Serie: | 2.10.57.0533 |
| Hardware-Version: | R1A |
![]()
![]()
Ingo Jentzsch
End userJoined: 09.02.2023
Contact
Imprint
Privacy Policy
Warranty information
Copyright © 2025 Snom Technology GmbH.
All rights reserved.
Firmware Update Center
PBX Partner
PBX Deployment How-to
Security and Privacy
DECT Multicell Installation
Copyright © 2025 Snom Technology GmbH.
All rights reserved.
Copyright © 2025 Snom Technology GmbH.
All rights reserved.
Copyright © 2025 Snom Technology GmbH.
All rights reserved.
More service from Snom
Copyright © 2025 Snom Technology GmbH. All rights reserved.