Release Date: 1. August 2023

NOTE:

For the new D8xx series, starting with D862 and D865 this is our 4th. Release deprecating the initial, second & third one. Please note: As the D8xx series is based on a substantially modernized software / software architecture you may find limitations & functional gaps compared to D3xx & D7xx series. The severity of such depends on the scope and complexity of your specific PBX solution. But no worries, if you will find your solution not yet fully supported as known from D3xx & D7xx: By upcoming development we will not only strive to close such potential gaps in comparison to D3xx & D7xx series asap, but even surpass these series in the future. Please make sure you review the known issues and limitations section below and see our PBX Partner overview in regards of D8xx series interoperability scope.

This Release is also the first one officially supporting the recently launched entry level models D140 and D150.

You will find a great start line in these D8xx Instructions. For additional information, datasheets, and how-to's please visit the product specific sites for D862 and D865.

Known issues and limitations:

Changelog

Changes since release version 10.1.152.12

New features:

XQI-1196: Added support of call transfer by handset hangup when two or more calls are ongoing @D8xx
XQI-2418: Support for Attended Transfer via Broadsoft BLF is added @D8xx #Broadsoft
XQI-2905: Support for Broadsoft ACD Unavailable code list menu is introduced @D8xx #Broadsoft
XQI-2981: Support for multiple parallel USB HID devices is introduced @D8xx
XQI-2986: Introduced support for a whitelist feature covering outbound registrations with a new setting: registrar_whitelist
XQI-2991: Support for Energy Efficient Ethernet IEEE802.3az power saving mode is added and configurable via settings: eth_net & eth_pc @PA1P @D140 @D150 @D335 @D713 @D717 @D735 @D8xx
XQI-3101: Introduced the capability to extend the New-UI menu with configurable XML Minibrowser based menu items, including two new settings: menu_items_source & menu_items_config @D8xx
XQI-3149: The XML Minibrowsers key fragment is now supported in IPPhoneSilent, to send DTMF or SIP INFO @D8xx
XQI-3260: Added support for DTMF commands in Speed dial function @D8xx
XQI-3330: The XML Minibrowsers is extented to support backspace in XML MB inputs per default on context key 3 @D8xx
XQI-3519: Adding a party to a network conference is introduced @D8xx #3CX
XQI-3551: New setting: suppress_display_name_in_contact_header is added, supporting to suppress DisplayInfo from SIP INVITE / Contact Header

Improvements and modifications:

XQI-1277: Translation support, via setting: web_language is introduced to the new WUI, web user interface / Phone Manager, - language support will be extended in upcoming releases @D8xx
XQI-2249: The setting webserver_type, default: https, is now supported by the new WUI, Phone Manager allowing http but also off configurations @D8xx
XQI-2464: To prevent accidential overwrite of the pagination key assigned per default to the last SmartLabel key per page a new setting: fkey_more_auto_assign_enable is introduced @D8xx
XQI-2876: XML definition is available for context keys @D8xx
XQI-3062: The "Change admin password" submenu under "System -> Advanced" is added to the PUI, phone user interface @D8xx
XQI-3069: Network conferencing is now extented with support for direct dialing @D8xx #3CX
XQI-3084: rsyslogd is sending logs to remote server configured via setting: syslog_server @D8xx
XQI-3170: The Call Card Focus in the PUI, phone user interface now switches automatically when in connected state @D8xx
XQI-3226: The Theme selection menu is now hidden from PUI, phone user interface until theming support is properly reintroduced @D8xx
XQI-3234: Turning DHCP On / Off is now possible in the new webinterface, Phone Manager @D8xx
XQI-3282: Several hardcoded Status messages, like "NTP server unreachable ...", PhoneCannotReachNtpServer are also now configurable via Phone Status Messages
XQI-3283: If DNS servers are not available or not responding to queries, the phone now retries the resolution within a predefined time of 600 seconds
XQI-3285: The default values for SmartLabel related settings smartlabel_idle_default, smartlabel_idle_expanded, smartlabel_call_default and smartlabel_call_expanded are changed to: full @D8xx
XQI-3398: The display background light is adjusted with respect to POE class of @D140 @D150
XQI-3399: Firmware Upgrade status has been modified to add proper warning for the end user not to remove power during the process @D3xx @D7xx
XQI-3480: The reboot for software update execution (and the connected pop up) is now delayed to prevent interference with active calls @D8xx

Corrections:

XQI-2091: Inside the PFK configuration screen, the Hardkey X and softkey Back did not follow the manual save mechanism @D8xx
XQI-2835: With "Auto-hide=On" the triggering of the PFK's, SmartLabels did not work @D8xx
XQI-2881: For Attended Join setup of a local conference, the PUI, phone user interface call listing did show navigation arrows and bar while navigation by UP/DOWN keys is consciously deactivated in that scenario @D8xx
XQI-2992: Navigating through the SIP identity list was freezing the phone if the first ID was deactivated @D8xx
XQI-3006: Ringback tone was not working in specific fallback conditions during an early media scenario
XQI-3009: The ContactManagement screen was not refreshed after AddContact screen and ContactDetails was not refreshed after EditContact screen @D8xx
XQI-3021: It was possible that Long PFK, SmartLabel key label texts getting truncated @D8xx
XQI-3040: Using the LINE key to go off hook was impossible, if there is one active/held call @D8xx
XQI-3063: The voicemail hardkey LED status was not indicated corresponding to current active identity @D8xx
XQI-3121: In case of a 4+1 local conference it was not possible to add a participant after one left the conference @D8xx
XQI-3148: Multiple changes of RTP stream caused software restart
XQI-3194: Accessing new webinterface, Phone Manager diagnostic page with DEBUG0 or higher overall level was not working reliable @D8xx
XQI-3209: The XML Minibrowsers element IPPhonetext: Maintext/Extratext was misaligned in some cases @D8xx
XQI-3241: Contacts: Not all possible groups were made available in PUI, phone user interface and WUI, web user interface @D8xx
XQI-3259: The conference screen wasn't displayed, after a far participant resumes its call @D3xx @D7xx
XQI-3284: The new webinterface, Phone Manager, did not display the correct call duration after a page refresh in case of an outgoing call @D8xx
XQI-3292: The Attended flow for the conference softkey was not working as expected, several labels for context sensitive keys were missing @D8xx
XQI-3300: The audio was missing when more than 2 simultaneous calls are ongoing @D713
XQI-3301: On digit key press while showing a call on hold, the dialer screen did open with an empty field, - now opens with a pre-filled dial field @D8xx
XQI-3319: Changing the audio device during early stages of a call could led into issues @D8xx
XQI-3333: It was impossible to park a 2nd call @D3xx @D7xx #Freeswitch
XQI-3336: The "Busy" message wasn't displayed after refusing a call in local conference @D3xx @D7xx
XQI-3359: The displayed call state could may be wrong after leaving a local conference screen @D8xx
XQI-3373: An unanswered call was wrongfully terminated after pressing Cancel during conference creation @D8xx
XQI-3410: For XML Minibrowsers / IPPhoneInput: external URLs were not loaded @D8xx
XQI-3421: The XML Minibrowsers screen was not closed, when XML Minibrowsers was requested to be closed by the core @D8xx
XQI-3469: The message "Request Timeout" was shown after a Call Transfer #Broadsoft
XQI-3495: The text in the PUI, phone user interface "Change admin password" dialog did overflow in German translation @D8xx
XQI-3513: The "Call Completed Elsewhere" dialog was missing @D1xx @D3xx @D7xx
SAP-7034: Directory matching CID got replaced by SIP Info @D7x5 #Freeswitch

Downloads

Firmware Files

Customization Files

VPN Feature Updates

L2TP Feature Updates

Root CA Certificates