Content
Release Date: 30. November 2022
Important Notes
- Please make sure you read ALL of the information below before installing the software on your device.
- Please install and test the software in your environment before mass deployment.
- We encourage you to read and follow our security advisories.
- This release does NOT directly include the OpenVPN feature in the firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.
- The models D345, D712, D725 are End of Sale (EOS) according to Snom Product Lifecycle and tested automatically. Please check out the Snom PLC for corresponding replacements!
NOTE:
For the new D8xx series, starting with D862 and D865 this is an Initial Release. As the D8xx series is based on a substantially modernized software / software architecture you may find limitations & functional gaps compared to D3xx & D7xx series. The severity of such depends on the scope and complexity of your specific PBX solution. But no worries, if you will find your solution not yet fully supported as known from D3xx & D7xx: By upcoming development we will not only strive to close such potential gaps in comparison to D3xx & D7xx series asap, but even surpass these series in the future. Please make sure you review the known issues and limitations section below and see our PBX Partner overview in regards of D8xx series interoperability scope.
You will find a great start line in these D8xx Instructions. For additional information, datasheets, and how-to's please visit the product specific sites for D862 and D865.
Important advice: The common audio LED behavior can potentially be changed & new status messages can occur in PUI
With enrollment of this firmware release in your specific PBX / phone deployment(s) users may experience one or both of the following changes:
- The common audio LED behavior can potentially be changed, if led_on was changed either by provisioning or locally on the phone
- New status messages can occur in PUI, if status_msgs_that_are_blocked was changed either by provisioning or locally on the phone
Technical background: New customization options for the audio LED behavior were introduced by XQI-1167, as referenced below in section New features. By this change, several new settings were introduced and default values added, that may cause the changes of user experience. But this will happen only if the setting led_on is changed from initial default values and/or if the setting status_msgs_that_are_blocked is changed from initial default values.
→ To do:
- By adding the newly introduced values
AudioIsMuted AudioDeviceIsHeadsetRTP AudioDeviceIsSpeakerRTP AudioDeviceIsHeadsetMulticast AudioDeviceIsSpeakerMulticast HeadsetIsActiveNoAudio AudioDeviceIsHeadsetRinging AudioDeviceIsSpeakerRinging AudioDeviceIsHeadsetDialtone AudioDeviceIsSpeakerDialtone AudioDeviceIsHeadsetDTMF AudioDeviceIsSpeakerDTMF AudioDeviceIsHeadsetRingback AudioDeviceIsSpeakerRingback AudioDeviceIsHeadsetMisc AudioDeviceIsSpeakerMisc
regarding Audio Indicator LED's to the setting led_on - By adding the newly introduced status messages
HeadsetIsActiveNoAudio AudioDeviceIsHeadsetRinging AudioDeviceIsHeadsetRingback AudioDeviceIsHeadsetDialtone AudioDeviceIsHeadsetDTMF AudioDeviceIsHeadsetRTP AudioDeviceIsHeadsetMulticast AudioDeviceIsHeadsetMisc AudioDeviceIsSpeakerRinging AudioDeviceIsSpeakerRingback AudioDeviceIsSpeakerDialtone AudioDeviceIsSpeakerDTMF AudioDeviceIsSpeakerRTP AudioDeviceIsSpeakerMulticast AudioDeviceIsSpeakerMisc
to the setting: status_msgs_that_are_blocked
Note : you can make custom adjustments to the value collections above depending on your user specific requirement - basically leveraging the new feature. Please be reminded to also take a look into the new settings: led_speaker_usage, led_headset_usage, led_mute_usage.
Important advice regarding upcoming hardware revisions of D717 & D735 (new LCD's), the D385N & D785N variants (without Bluetooth support) and the D713, D717, D735 (new network PHY)
The phone models D717 and D735 will get new LCDs in an upcoming hardware revision. This release here is the fifth publicly available firmware that supports the new hardware revision and all the previous ones. But to prevent the new revision from being potentially bricked by downgrade attempts to older firmware releases, we introduced a compatibility check in the firmware update process (see SAP-6152 at 10.1.84.12 Release). In addition, new settings / setting values are integrated in this release here to facilitate identifying the new hardware revision to support e.g. it's handling in provisioning or other related maintenance-, inventory- management tasks.
- a new setting hardware_version
- the value of hardware_version is shown in WUI (web user interface) section System Information /info.htm and PUI System Info screen
- a new "X-snom-" custom HTTP header is added providing the value of setting hardware_version in phone web requests (e.g. provisioning data requests)
The new phone models D385N and D785N are basically HW revisions of D385 and D785 without the Bluetooth chip. In upcoming hardware revisions of D713, D717 and D735 the network PHY is changed.
The same downgrade / potential brick protections as for D717/D735 new HW (new LCD's) do apply. The recently introduced compatibility check in the firmware update process is now extended to this revisions.
Known issues and limitations:
XQI-2180: In case the phone is handling 2 or more calls and starts a remote/server conference it will always switch into speaker/handsfree mode instead of keeping the current preferred audio device @D8xx series
→ No workaround, but a beta FW version with the required correction can be made available on request (please see: How to submit a support request on Snom Helpdesk)
SAP-6326: The new WUI, web userinterface is far advanced, esp. technically compared to D3xx & D7xx but does not yet support the entire scope of options & features known from its predecessor @D8xx series
→ Workaround: You can still access the predecessor webinterface via http:// IP address of the phone:3112 (please note the http instead of http*s* and the port 3112) Hint: the screenshot feature opening /screen.bmp is also supported for D862 & D865.
XQI-1101: While LDAP is generally supported as in the D3xx or D7xx, like e.g. for inbound / outbound name & Call ID picture resolution & presentation, the search for LDAP contacts is not yet supported in the new PUI, phone user interface of the @D8xx series
→ No workaround.
XQI-713: While the configuration or provisioning of the Keypad/-board Lock related settings, like e.g.: enable_keyboard_lock is supported as in the D3xx or D7xx series it is not yet supported in the new PUI, phone user interface of the @D8xx series
→ No workaround.
XQI-523: While the configuration or provisioning of a Dialplan is supported as in the D3xx or D7xx series it is not yet supported / not yet effective in the new PUI, phone user interface of the @D8xx series
→ No workaround.
SAP-5625: The MJPEG support (e.g. for door phone integration) is limited to work correctly only in idle state, but not in Ringing or Connected, - the issue is under investigation.
→ No workaround. Please make sure that you do not use this version if you need MJPEG support for Ringing and/or Connected state
SAP-5942: Due to a regression the setting rtp_early_media_muted is broken, - no local ringback with early media. Related log statement: "[DEBUG0] MEDIA: RTP: no incoming early media packets, play ringtone instead".
→ No workaround, but a known last known good with 10.1.37.11
XQI-2295: Due to a regression reassigning of context sensitive function keys via WUI is impossible @D3xx @D7xx. Assigment via provisioning is not affected, as well as changing settings incl. reassignment of fkeys via HTTP GET requests or the Right-click in Setting page.
→ Workaround: In case provisioning or HTTP GET requests are no option, please use the Right-click in Setting page to assign the desired function to the context sensitive function keys.
Changes since release version 10.1.127.10
New features:
XQI-1167: Introduced new customization options for the audio LED behavior, incl. new settings: led_speaker_usage, led_headset_usage, led_mute_usage and new default values added for: led_on & status_msgs_that_are_blocked
XQI-1599: A new setting provider_help_text is introduced allowing to costumize the information inside the PUI "Help" screen for the new D8xx series @D862 @D865
XQI-1610: Support for the 3CX SBC tunnel feature, incl. new settings: 3cxsbc_prov_enabled & 3cxsbc_prov_url is added to the new D8xx series @D862 & D865
XQI-1613: Introduced logging support inside VPN module on diagnostic webpage in new WUI (Phone Manager) for the 3CX SBC tunnel feature, - visible only after feature update package is installed @D8xx #3CX
XQI-1662: New setting introduced: expansion_module_smart_pages supporting the new Smart Page Feature for D7C USB colour expansion module (no D7C FW update required)
XQI-2096: Introduction of LED-control for several Kuando Busylight USB devices, incl. a new setting led_external_busylight_usage for customization @all deskphones with USB
XQI-2190: New TR-369 / USP User Services Platform support, incl. related setting tr369_use_acs is introduced & activated for the new D8xx series @D862 @D865
SAP-3997: Introduction of BLF Audio indication configurable per BLF Key with setting blf_pickup_audio_indication & specific ringtone option via: fkey_blf_pickup_ringer
SAP-6009: New setting dkey_dnd_behavior introduced supporting to reverse the dedicated DND key (long/short press) behavior
Improvements and modifications:
XQI-1642: New PUI & WUI (Phone Manager) will warn the admin/user if new security settings: webserver_admin_name, webserver_admin_password, webserver_user_name, webserver_user_password are not set away from default @D8xx
XQI-1663: The next-generation feature/ mini update support for OpenVPN, L2TP and 3CX SBC tunnel is added to the new D8xx series @D862 & @D865
XQI-1744: Caller ID picture is now supported and shown if provided by the LDAP server for the new D8xx series @D862 @D865
XQI-1766: The preferred audio device can now be changed on the PUI, via Main Menu / Preferences / Sound for the new D8xx series @D862 @D865
XQI-1767: The user_ringer can now be changed on the PUI for every identity, via Main Menu / Preferences / Sound for the new D8xx series @D862 @D865
XQI-1778: The contact import handling is improved so that locally created contacts are taken into account, group associations (like Favourite) remain intact and the complete=true attribute from the import XML is fully applied as expected
XQI-1835: Introduced support for Favourite and Deny group tags for contact handling to enable Favourite & Deny listing in the new D8xx series @D862 @D865
XQI-1846: In addition to number lookup the new UI supports now also the name lookup within the dialing screen for the new D8xx series @D862 @D865
XQI-1882: The (Sys)log timestamps are based on UTC only for the new D8xx series @D862 @D865
XQI-1922: The F_DIRECTORY_SEARCH keyevent is now handled as a F_ADR_BOOK keyevent in the new D8xx series @D862 @D865
XQI-1940: A new X-snom / Non-standard HTTP Header is added to indicate that the 3CX SBC feature is installed / enabled - see: X-snom-Non-standard HTTP headers for the new D8xx series @D862 @D865
XQI-1942: The trust handling for snomXML content via SIP notifies received & accepted from mb_trusted_hosts is improved so that the trusted flag for execution is not only set, but also inherited to embedded XML's called within the received one
XQI-1994: In case of multiple identites the phone shows the currently used identity on call screen in alignment with related setting call_states_with_local_party for the new D8xx series @D862 @D865
XQI-2040: USB HID event (like offhook, onhook and mute from USB headsets) handling is added to the new D8xx series @D862 @D865
XQI-2045: Support for the credentials request dialog in the phone UI (PUI) in case of HTTP/S Client authentication challenges is added to the new D8xx series @D862 @D865
XQI-2110: The onhook/offhook and mute synchronisation was aligned to latest headset firmware changes of the Snom A330 M/D @all deskphones with USB port
XQI-2140: Show notification and error messages on the welcome screen for the new D8xx series @D862 @D865
Corrections:
XQI-1496: Inside local phonebook, the sorted view did place contact entries that have first or last name starting with a number (e.g. 7crown) at the end of the list (instead of starting with such entries)
XQI-1572: Voice Quality was degraded when a second call was connected using g729 @D713
XQI-1575: The telephone-event (DTMF) with non-default payload type was missing in SDP response when user_full_sdp_answer is set to off
XQI-1578: The Smart Transfer dialog was closed automatically if the user is not interacting before the XML Minibrowsers related timeout @D1xx @D3xx & D7xx
XQI-1759: Displaying of forwarded call on call screen was corrected for the new D8xx series @D862 @D865
XQI-1852: The first name of contacts was missing in the Directory view of the new D8xx series @D862 @D865
XQI-1898: Due to a regression pressing the mute button on Snom A150 or A170 headsets with A230 DECT USB dongle did not work anymore @desktop telephones with USB
XQI-1899: Due to a regression pressing the call button once on Snom A150 or A170 headsets with A230 DECT USB dongle did not work anymore @desktop telephones with USB
XQI-1905: The Welcome Screen did not disappear even if the PUI language was configured in the new D8xx series @D862 @D865
XQI-2058: Ringback tone is fixed in early media scenario with 183 Session Progress before 180 Ringing
XQI-2118: If a number provided by XSI directory includes a '-' (dash), it was impossible to dial that number without removing the dash first @Broadsoft
XQI-2157: In some cases of an incoming intercom call the audio switched to USB when the headset signalized that switching
XQI-2171: The phone did send an (on the other side) unexpected crypto-suite in subsequent SDP offers in HOLD / Resume scenarios so the audio encoding / decoding may went wrong afterwards
XQI-2198: The USB headset was not supported as Ringer device in the new D8xx series @D862 @D865
Firmware Files
Phone Model |
File Size |
SHA-256 Checksum |
Download Link |
|---|---|---|---|
D335 |
36.2 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD335-10.1.137.15-SIP-r.bin |
D713 |
38.0 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD713-10.1.137.15-SIP-r.bin |
D717 |
37.0 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD717-10.1.137.15-SIP-r.bin |
D735 |
36.7 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD735-10.1.137.15-SIP-r.bin |
D862 |
116.6 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD862-10.1.137.15-SIP-r.swu |
D865 |
117.1 MB |
|
https://downloads.snom.com/fw/10.1.137.15/bin/snomD865-10.1.137.15-SIP-r.swu |
Customization Files
VPN Feature Updates
Phone Model |
File Size |
SHA-256 Checksum |
Download Link |
|---|---|---|---|
D315 |
227.4 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD315-10.1.137.15-vpnfeature-r.bin |
D335 |
227.5 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD335-10.1.137.15-vpnfeature-r.bin |
D345 |
227.4 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD345-10.1.137.15-vpnfeature-r.bin |
D385 |
227.5 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD385-10.1.137.15-vpnfeature-r.bin |
D712 |
227.4 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD712-10.1.137.15-vpnfeature-r.bin |
D713 |
226.8 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD713-10.1.137.15-vpnfeature-r.bin |
D715 |
227.4 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snom715-10.1.137.15-vpnfeature-r.bin |
D717 |
227.5 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD717-10.1.137.15-vpnfeature-r.bin |
D725 |
227.4 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snom725-10.1.137.15-vpnfeature-r.bin |
D735 |
227.5 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD735-10.1.137.15-vpnfeature-r.bin |
D785 |
227.5 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD785-10.1.137.15-vpnfeature-r.bin |
D862 |
229.0 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD862-10.1.137.15-vpnfeature-r.swu |
D865 |
229.0 kB |
|
https://downloads.snom.com/fw/10.1.137.15/vpn/snomD865-10.1.137.15-vpnfeature-r.swu |
L2TP Feature Updates
Root CA Certificates
Phone Model |
File Size |
SHA-256 Checksum |
Download Link |
|---|---|---|---|
D315 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD315-10.1.137.15-CAs.csv |
D335 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD335-10.1.137.15-CAs.csv |
D345 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD345-10.1.137.15-CAs.csv |
D385 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD385-10.1.137.15-CAs.csv |
D712 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD712-10.1.137.15-CAs.csv |
D713 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD713-10.1.137.15-CAs.csv |
D715 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snom715-10.1.137.15-CAs.csv |
D717 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD717-10.1.137.15-CAs.csv |
D725 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snom725-10.1.137.15-CAs.csv |
D735 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD735-10.1.137.15-CAs.csv |
D785 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD785-10.1.137.15-CAs.csv |
D862 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD862-10.1.137.15-CAs.csv |
D865 |
459.3 kB |
|
https://downloads.snom.com/fw/10.1.137.15/ca/snomD865-10.1.137.15-CAs.csv |