Release Date: 15. December 2023

NOTE:

For the new D8xx series, starting with D862 and D865 this is our 5th. Release deprecating the initial, second, third, and 4th one. Please note: As the D8xx series is based on a substantially modernized software/software architecture you may find limitations & functional gaps compared to D3xx & D7xx series. The severity of such depends on the scope and complexity of your specific PBX solution. But no worries, if you find your solution not yet fully supported as known from D3xx & D7xx: By upcoming development we will not only strive to close such potential gaps in comparison to D3xx & D7xx series ASAP, but even surpass these series in the future. Please make sure you review the known issues and limitations section below and see our PBX Partner overview in regards of D8xx series interoperability scope.

This Release is also the second one officially supporting the recently launched entry-level models D140 and D150.

You will find a great start line in these D8xx Instructions. For additional information, datasheets, and how-to's please visit the product-specific sites for D862 and D865.

Known issues and limitations:

Changelog

Changes since release version 10.1.159.12

New features:

XQI-2405: As part of introduction of TR-369 - Full Endpoint Management support, TR-369 controller URL setting with tr369_mqtt_hostport is added @D8xx
XQI-3060: A "Call Waiting" submenu is added under "Call features" on "Main menu" screen in PUI @D8xx
XQI-3161: Support for XML tbook file import into Local Directory is extented to new WUI / Phone Manager @D8xx
XQI-3325: When setting up new WiFi network manually an option to display the entered password is added @D865
XQI-3368: Support for TR-369 - Full Endpoint Management is introduced @D140, D150
XQI-3903: Support for TR-369 - Full Endpoint Management is introduced @D713 @D717 @D735
XQI-3430: Support for Action URLs configuration is introduced to the new WUI / phone manager @D8xx
XQI-3520: Adding a party in a blind way to a network conference is supported @D8xx
XQI-3665: Added support for Język polski (Polish language) and Українська мова (Ukrainian language) in WUI and GUI @D3xx @D7xx @D8xx
XQI-3687: In case of the called number is busy or unreacheable, the corresponding tone is played @D8xx
XQI-3707: Support added for array setting ranges in XML Minibrowsers fragment set & setcache
XQI-3709: Phone rings now only once on all audio devices, see new setting: user_ringer_once
XQI-3785: Dialplan timeout functionality is added @D8xx
XQI-3826: Multicast specific paging screen is added including a multicast paging zone selection submenu @D8xx
XQI-3854: Support for DNS Penalty Box is introduced @D3xx @D7xx @D8xx
XQI-4094: The InfoBox functionality is extented with support for SIP MESSAGE based presentation of Presence Info @D8xx
XQI-4100: Added an information on Welcome Screen, if the phone is beeing provisioned @D8xx
XQI-4236: Added support for Headset(Poly) SAVI 7320 OFFICE @D8xx
XQI-4291: Support of headset ringing. Now fully controlled with the existing ringer_headset_device setting without implication of the preferred_audio_device value @D8xx
XQI-4293: Localisation and Time format selection is now available on PUI @D8xx

Improvements and modifications:

XQI-3053: The SmartLabel keys / PFK (next page) browsing performance is significantly improved @D8xx
XQI-3068: For a more streamlined user experience every PFK, Smartlabel key page that has all keys configured to keytype "none" (unassigned) is not displayed anymore @D8xx
XQI-3078: A toast message is added, informing the user when pressing the voicemail hard key, that the voicemail retrieval code is not configured @D8xx
XQI-3518: The support for the Nickname field is removed / deprecated from the internal tbook (Local Directory) @D8xx, @D7xx, @D3xx
XQI-3535: ExtraText subtag support is added to IPPhoneInput -> InputItem, improving XML Minibrowsers @D8xx
XQI-3574: Based on recently introduced setting user_call_forward_suffix the forwarding with suffix is extended with remote forward, sending fwd_all_on_code + target + user_call_forward_suffix when unconditional forward is activated
XQI-3603: Support for Kuando Busylights LED-control is extented to more models, like e.g. Busylight UC Alpha incl. setting support led_external_busylight_usage for customization @all deskphones with USB
XQI-3631: Connecting to WiFi is supported from the Welcome Screen @D865
XQI-3673: WiFi network scan/rescan is improved @D865
XQI-3714: Remove ellipsis of a long string if the string undergoes auto-scrolling @D8xx
XQI-3801: Line selection is shown if more than one line is active @D8xx
XQI-3952: The maximum capacity of local conference participants is increased to 4+1 @D862
XQI-4214: Introduction of multiple improvements related to the audio behaviors of the phone @D8xx
XQI-4302: The NTP unreachable status message is removed from the default list of status_msgs_to_pop_up

Corrections:

XQI-2181: Clearing the call history did not remove the missed calls notification @D8xx
XQI-2551: An empty Call Forwarding target was not validated when a PFK is programmed as Call Fwd Always @D8xx
XQI-2650: The input_field in XML Minibrowser kept the already provided values
XQI-2927: Recently dialed numbers were shown at top of contact list when opening the phonebook menu @D8xx
XQI-3022: It was impossible to select XML ReplacementPlan on the classic WUI, web user interface
XQI-3041: Automatic line key assignement when starting dialing did not work @D8xx
XQI-3042: Auto Dial was not working in state offhook via speaker, corded handset or headset @D8xx
XQI-3058: Adding local directory entry to Favorite, Group or Blacklist group was not working @D8xx
XQI-3089: Dialed number is not properly formatted when dialnumber_us_format is enabled @D8xx
XQI-3116: With a Bluetooth headset paired, the incoming call ringer was continuing to ring on the Bluetooth headset when the incoming call is answered via the LINE key @D865
XQI-3122: Several WiFi scan, rescan, connection and reconnection issues are fixed @D865
XQI-3132: In alignment with TR-104 VoiceService:1 the related TR-104 parameters support now the values Enabled and Disabled
XQI-3213: Due to space constraints and fontsize, the ACD info texts were not shown @D735, @D717 and @D713
XQI-3218: Both, the PUI and WUI local directory only displayed the first 50 contact entries @D8xx
XQI-3224: Displayed date was not following the configured localisation setting locale @D8xx
XQI-3246: Headset was ringing no matter the configuration of preferred_audio_device and ringer_headset_device settings @D8xx
XQI-3298: The process of Bluetooth headset pairing did hang with a frozen "Pairing with..." popup message in phone UI @D865
XQI-3318: EHS device connection did not work if connected with @D862
XQI-3352: It was impossible to use the down navigation key to select Identity 3 when Identity 2 is not registered @D8xx
XQI-3357: Sometimes the instant redial key was not working @D8xx
XQI-3360: The identity with 'Hidden Identity=On' was visible on the default identity configuration screen @D8xx
XQI-3367: When using Speeddial keys with DTMF sequences configured, the corresponding digits were shown twice in PUI and the related DTMF sequence was send twice SIP INFO with dtmf-relay
XQI-3485: With a very large call history the phone was getting significantly slow, unresponsive and/or rebooted @D3xx @D7xx
XQI-3500: Local directory grouping info was blocked to update @D8xx
XQI-3514: Setting ringer_headset_device value headsetloud renamed to speaker_and_headset and interaction with preferred_audio_device is corrected
XQI-3532: Favorites and Groups tab remained empty even after contacts are assigned to groups @D8xx
XQI-3537: Switching between audio devices was not possible if the call was not yet established @D8xx
XQI-3553: By renaming a paired Bluetooth headset the Bluetooth setting of the phone was erroneously turned OFF @D8xx
XQI-3572: The displayed contact information was too much truncated when the SmartLabels are at full size @D8xx
XQI-3614: The ExtraText of an IPPHONEINPUT (used in XML Minibrowser) was shown unexpectedly @D8xx
XQI-3622: Globally defined softkeys were shown unexpected in some cases
XQI-3629: Welcome screen text was placed too low @D8xx
XQI-3663: Handling of multiple SIP check-sync received in short time frame could lead into phone crash
XQI-3667: Speeddial on PFK: valid number was detected as "empty" when the pfk is reprogrammed @D8xx
XQI-3669: PFK: Blind transfer failed with BLF when DUT has an active call @D8xx
XQI-3691: Softkey on welcome screen were not detected in every case
XQI-3706: Extension failed to transfer if "quick_transfer” is configured to “attended” (via PFK) @D8xx
XQI-3708: Action URL Setup - strings did not match the specification @D8xx
XQI-3726: The SIP BYE was not replied when a related SIP message is received at the same time
XQI-3766: Call Forward related Notification Status Messages were not visible @D8xx
XQI-3770: BLF pickup using a PFK, SmartLabel key failed in mixed mode @D8xx #3CX #Kamailio
XQI-3782: When Context Key Label is updated the phone continued to show the outdated value @D8xx
XQI-3799: When a local conference is scaled-down to a normal active call the status bar did erroneously show the call status as: Ended @D8xx
XQI-3909: When using Speeddial keys with DTMF sequences configured, such DTMF sequences were erroneously replayed after a call is resumed from hold
XQI-3927: Muting the incoming call indication was not supported @D8xx
XQI-4024: When a call with a USB headset is muted, it remained muted for the next incoming call as well @D8xx
XQI-4026: Unexpected audio device change occurred while doing an attended transfer scenario by call resuming @D8xx
XQI-4082: The PUI, phone user interface did not automatically return to the idle screen, if the phone stays offhooked for a long time @D8xx
XQI-4120: Support for Auto Dial via "Speaker" / "Headset" key was temporally out-of-service if the previous Auto Dial call is cancelled by CANCEL key @D8xx
XQI-4137: XML Minibrowser based Menu/InputField did fetch the URL incorrectly
XQI-4170: The displayed date format was not aligned with the setting: locale @D8xx
XQI-4184: Joining multiple participants in a blind way to a local conference was not available @D8xx
XQI-4195: When entering the call forward screen, the audio with the connected call was lost @D8xx
XQI-4211: Headset Call control with #Poly was not working with @D8xx
XQI-4212: Mute key of #Poly & #Snom Headsets is not in sync with @D8xx
XQI-4216: Answering a call via USB headset was not always reliable working @D8xx
XQI-4221: Forwarding a ringing call requires the dialer screen to play the dialtone @D8xx
XQI-4250: EPOS SC660 USB headset call control was not properly supported
XQI-4260: Dial tone is observed after the first pre-dial digit is pressed @D8xx
XQI-4287: Call control was not working for Sennheiser SC260 @D8xx
XQI-4395: TR-104 CallState parameter was not returning the proper call states
XQI-4397: In case of an identical o-line in SDP messages the phone skipped the new SDP negotiation

Downloads

Firmware Files

Customization Files

VPN Feature Updates

L2TP Feature Updates

Root CA Certificates