Content

Page tree

Release Date: 27 September 2023

Important Notes

  • Please make sure you read ALL of the information below before installing the software on your device.
  • Please install and test the software in your environment before mass deployment.
  • We encourage you to read and follow our security advisories.
Please combine the FW version 1.0.0.3 update of the phones with the corresponding handset firmware (if applicable) you will find in the Firmware Files table below.

Changelog

Changes since 1.0.0.0

  • #746: UPD - Snom MKT version to 1.0.0.3
  • #1190: FIX - HD35x Make outbound call wrongly with Speed dial key
  • #1074: UPD - Hotel phone Dect frequency band switch
  • #1278: DEL - HM201 FCS/TSI support
  • #1252: Fix - Dial plan matching fail
  • #1281: FIX - Snom hotel phone HD101 User Agents name
  • #1191: FIX - HD351W: Base's charge LED display
  • #1264: FIX - SIP reg failed due to DNS list not updated
  • #1236: UPD - Snom hotel phone default settings
  • #1281: FIX - Snom hotel phone User Agents name
  • #1221: FIX - SRTP call does not work
  • #1220: ADD - iLBC support in Phone application
  • #1220: UPD - CSS loader and header files for SDK2.12
  • #1222:FIX - No dial tone while talking digit on
  • #1050: UPD - Add logging support for sip packets
  • #1091: SIP speed dial entry programming on PUI
  • #746: UPD - Snom MKT version to 1.0.0.1
  • #1219: UPD - HD101 user agent name and provisioning URL
  • #1204: Updated keycode to swap voice language
  • #1132: Update HM201 bootloader to v1.42
  • #746: Update Snom MKT version to 1.0.0.0
  • #1132: Create Snom HM201 model
  • #1106: Fixed compilation issues
  • #1106: Fixed CallBlock cannot save used key 0
  • #1086: Fixed AutoAns cannot save used key 0
  • #746: Update Snom MKT version to 1.0.0.2
  • #1204: Updated to support french announce
  • #1204: Added voice language at configurations
  • #1153: Add STIR/SHAKEN support in CallSlot Model
  • #746: Update Snom MKT version to 1.0.0.1
  • #1132: Update new Snom models user agent naming
  • #1086: Fix Paging Zone register error leads to bootup failure
  • #1132: Create Snom HD100 model
  • #1132: Remove the HW version checking for HD350W and HD351W
  • #1132: Create Snom HD35X model for HD350W and HD351W
  • #746: Update Snom MKT version to 1.0.0.0
  • #1132: Fix HD1x1 WebUI cannot show message box
  • #1132: Create Snom HD1X1 model for HD101
  • #1133: Hotel phone - Display Dect frequency band on WebUI
  • #1078: Fix DHCP/Static unable to start w/o Gateway
  • #1121: Insert call prefix by speed dial keys
  • #1036: Update audio profile checking for SDK2.12
  • #1088:Fixed snom models compilation issue.
  • #1050: ADD - logging support for sip packets
  • #1036: FIX - Use monotonic clk for semaphore condvar
  • #1093: Use 3-pos sw to change ringer volume
  • #1036: Update key assignment according to latest ID
  • #1036: Add support of 3-pos switch keymaps
  • #1048: Fixed WebUi cannot display 'Only accept trusted certificates' setting correctly.
  • #1015: Update backlight control logic
  • #1021: Turn on wifi functionality after pressed the corresponding keycode

Firmware Files

Phone ModelFile SizeSHA256-checksumDownload LinkHandset ModelFile SizeDownload LinkSHA256-checksum
HD10046 MB16e4dfe67fc4fe663cc8d32bdf2153e3565d5f7582be4ac9b033ea1539596a11HD100-1.0.0.3-0.img



HD10146,1 MB ebb37db4a82cb59976e2c42c56d9bfed8b806dea85fb381121e41fef475246eeHD101-1.0.0.3-0.imgHD1470 KBHD1-HD3-HS-1.2.15-0.img02e929b0096d72f790394249c83991df938155d3ad29d60182e65f003e08275d
HD350W49,1 MB9985edd4b35fd108cec906b66293159672590972a8c58e4db91e92a7c2919197HD350W-1.0.0.3-0.img



HD351W49,1 MBb9044d1b9887cc774e2bae694cf58e7832e322195810b5894aa6e320877afd03HD351W-1.0.0.3-0.imgHD3
HD1-HD3-HS-1.2.15-0.img02e929b0096d72f790394249c83991df938155d3ad29d60182e65f003e08275d
HM20145,6 MBba3510b81362e6f7fc8dd8d2cf6f517e7bfdaf62c1e3ebe8c1dd7b1314d88d06HM201-1.0.0.3-0.imgHM21,1 MBHM2-HS-1.04.01-27.img6c698dd30bd2f15d6e28d741322d201ac8a00314a59665c25b988e2c38913e3f