cordless.x.allow_barge_in

M500

Web User Interface

System → Device Preferences → Call Settings → Call Privacy for KeyLine → Enable Barge-in by default

Phone User Interface

N/A 

Initial Firmware Version

1.14.4

Text Configuration

cordless.x.allow_barge_in = VALIDVALUE

Description

Configures the default Call Privacy setting for handset/deskset x. If enabled, barge-in will be allowed for shared calls by default when a call is dialed out, answered or resumed from held on handset/deskset x. During a call, user can override the barge-in default via the PUI. 

where x =  Device number (1-48)    Note: The M500 supports a maximum of 16 devices in dual cell mode. 

Valid Values

0 (disabled), 1 (enabled)

Default Value

1