country_region_id

M-SERIES

Setting Category

<Global Settings>

Web User Interface

Country → State / Region

XML Configuration

<country_region_id>VALIDVALUE</country_region_id>

Description

If a country has regions/states ( e.g. the US or Australia), this setting allows their configuration. If not, the setting will not be used.

Important

This setting will be used when the timezone_by_country_region setting is enabled. If there is a conflicting timezone setting, the timezone setting will be overridden. When the timezone_by_country_region setting is disabled (off), the timezone setting will be used if there is a conflict.

The setting tone_scheme must be set accordingly.

Valid Values

tone_scheme = US,

• 0 = Alabama,
• 1 = Alaska,
• 2 = Arizona,
• 3 = Arkansas,
• 4 = California,
• 5 = Colorado,
• 6 = Connecticut,
• 7 = Delaware,
• 8 = Florida,
• 9 = Georgia,
• 10 = Hawai,
• 11 = Idaho PST,
• 12 = Idaho MST,
• 13 = Illinois,
• 14 = Indiana,
• 15 = Iowa,
• 16 = Kansas,
• 17 = Kentucky EST,
• 18 = Kentucky CST,
• 19 = Louisiana,
• 20 = Maine,
• 21 = Maryland,
• 22 = Massachusetts,
• 23 = Michigan,
• 24 = Minnesota,
• 25 = Mississippi,
• 26 = Missouri,
• 27 = Montana,
• 28 = Nebraska,
• 29 = Nevada,
• 30 = New Hampshire,
• 31 = New Jersey,
• 32 = New Mexico,
• 33 = New York,
• 34 = North Carolina,
• 35 = North Dakota,
• 36 = Ohio,
• 37 = Oklahoma,
• 38 = Oregon,
• 39 = Pennsylvania,
• 40 = Rhode Island,
• 41 = South Carolina,
• 42 = South Dakota CST,
• 43 = South DakotaMST,
• 44 = Tennessee,
• 45 = Texas,
• 46 = Utah,
• 47 = Vermont, 
• 48 = Virginia,   
• 49 = Washington,
• 50 = West Virginia,
• 51 = Wisconsin,
• 52 = Wyoming,

tone_scheme = AUS,

• 1 = New South Wales,
• 2 = Victoria,
• 3 = Tasmania,
• 4 = Australian Capital Territory,
• 5 = South Australia,
• 6 = Northern Territory,
• 7 = Queensland,
• 8 = Western Australia

Default Value

empty