Snom Service Hub

Content

Page tree

D-SERIES

Web User Interface

Preferences - General Information(Section)

Phone User Interface

Preference->Display->Ambient Light

Initial Firmware Version

10.1.32.3

XML Configuration

<enable_ambient_light perm="PERMISSIONFLAGS">VALIDVALUE</enable_ambient_light>

Description

Operation als modes controlled via settings

We could assign "enable_ambient_light" with current values:"off|active|on"
The default value is "off".


The values have the following meanings

  • "off": backlight is not controlled by the sensor
  • "on": backlight is controlled always by the sensor
  • "active": backlight is controlled by the sensor in active mode only and gets
    in idle mode its value from "backlight_idle"-setting.

With "ambient_light_level" you are able to customize the 6 als level with an associated backlight level.

  • The default value is stored in "ambient_light_level" with "1,3,5,8,12,15" and representing 6 values from 0-15 for each of the 6 als levels.

Valid Values

  • "off": backlight is not controlled by the sensor
  • "on": backlight is controlled always by the sensor
  • "active": backlight is controlled by the sensor in active mode only and gets
    in idle mode its value from "backlight_idle"-setting.

Default Value

off