Snom Service Hub

Content

Page tree

D-SERIES

Web User Interface

Advanced - Audio (Tab) - Audio(Section)__Handsfree Mode

Phone User Interface

N/A

Firmware

7.1.33

XML Configuration

<handsfree_mode perm="PERMISSIONFLAGS">VALIDVALUE</handsfree_mode>

Description

It sets the handsfree mode for different kinds of rooms like quiet room, normal room, echoic room. In normal scenarios the speaker phone should work fine in quiet room or normal room setting. But in case of especially echoic room, the echoic mode can be set. When you select the different modes the casing mic volume (the setting just above) also changes accordingly to reflect what is best for that mode (although you can tweak the mic volume yourself as well).

Note: Echoic room means, since the room is echoic, be agressive on the echo cancellor. If the room is not so echoic, this setting could cause the chopping since the echo cancellor is aggressive but the room is not so echoic.
Please also note that changing this setting will also affect the Casing Mic Volume

This setting is available only on the snom3x0 devices.

Valid Values

  • quiet room quiet
  • normal room normal
  • echoic room echoic

Default Value

  • quiet room quiet