line_info_at_presence

D-SERIES

Web User Interface

N/A

Phone User Interface

Long press of button P4 enables or disables the line-info-layer for the current screen when setting 'show_line_info' is set to 'on'.
Since 8.6.7 this setting can no longer be changed in PUI.

Firmware

N/A

XML Configuration

<line_info_at_presence perm="PERMISSIONFLAGS">VALIDVALUE</line_info_at_presence>

Description

Shows the line key info in when selecting your current presence state. That is the state the phone is after you have pressed the "Presence State" softkey.
since 8.6.7, this setting cannot apply, when all 4 line-keys are set to "none". When all are "none", the line info layer will never be shown.
for temporarily overwriting this setting, please look here (since 8.6.7)

Valid Values

on
off
smart (since 8.6.7) > show only on activity - the layer is only shown when you have calls that are not shown in standard gui (i.e. w/o the layer).

Default Value

on
since 8.6.7: smart