Page tree

C620 M100 M200 M500

Web User Interface

Network → Basic→ IPv6 → Radio button selection (Disable, Auto Configuration, Static IP)

Phone User Interface

ModelPhone User Interface
C620Status & Settings → Admin settings → Network setting → IPv6 → Mode
M100Admin Settings → Network setting → IPv6 → Mode
M200Admin Settings → Network setting → IPv6 → Mode

Text Configuration

network.ip6.mode = VALIDVALUE

XML Configuration (C620, M100, M200 only)







Set the IPv6 network mode, depending on how the device will be assigned an IP address.

M500 Multi-cell: Configure this setting for a specific base station. This is NOT a site-wide setting.

Valid Values

disable, auto, static

Default Value