Snom Service Hub

Content

Page tree

D-SERIES

WEB USER INTERFACE

Identities - SIP Settings(Tab): Default Contact Number 

PHONE USER INTERFACE

V10

Snom7xx: press "Menu" - Preferences - General - Quick Dial Contacts

Snom3x0: press "Settings" - Preferences - General - Quick Dial Contacts

FIRMWARE VERSIONS

V8  

XML CONFIGURATION

<user_default_contact_uri idx="INDEX" perm="PERMISSIONFLAG">VALIDVALUE</user_default_contact_uri>

DESCRIPTION

OCS offers the user the possibility of publishing additional phone numbers under which he or she is reachable. This information will published along with the user's presence information. When traversing a contact list on a snom phone, a contact may be called by selecting it (i.e. scrolling until it is highlighted) and then pressing 'enter' or going offhook. By default the contact's SIP URI is used to place the call. This setting allows the default to be changed to one of the published phone numbers. This is paricularly usefull in environments where OCS is used for presence only and voice is routed over a different server, as the OCS SIP URI cannot be used in this case to establish a voice call.

Since V10

This setting is used by server directories such as Metaswitch, LDAP, Broadsoft XSI and Broadsoft Xmpp Contacts, to control the behavior when user presses OK on a contact:- If set to "none" (default), bring up the Contact Details screen of the contact- If set to "main", directly dial the number that is considered the main one of the contact. For LDAP, the main number is by default the first number returned by server as telephoneNumber. This can be changed my editing setting http://wiki.snom.com/Settings/ldap_telephonenumber_mapping . For example if you set ldap_telephonenumber_mapping to "home", the main number will be the first number returned by server as homePhone.

VALIDVALUE

'none', 'work', 'mobile', 'home', 'other'

Since V10 - 'none', 'main'

DEFAULTVALUE

'none'