Public Anouncement Features

On This Page you find some Links to PA1 Features.

We suggest to visit the following Link first: What can you do with a PA1?

• PA1 - Accessory Cable
• PA1 - Keyboard pcb
• PA1 - Relaysboard pcb

• Page:
  08.7.5.75 MRU PA1
• Page:
  Archive - PA1
• Page:
  Auto Disconnect Page to the PA1
• Page:
  Connecting The PA1 to Relays for Door Phone Applications
• Page:
  Dooropener for Snom PA1
• Page:
  Firmware Archive
• Page:
  How do I connect my Amplifier with a Loop Start,TEL,Tip and Ring connection to the PA1
• Page:
  How to activate a PA1 PIN when the device receives a call
• Page:
  How To Configure Multicast Paging
• Page:
  How to connect to the PA1's Default IP Address 192.168.0.2
• Page:
  How to decrease/increase audio output volume of the PA1 and PA1+
• Page:
  How to play a tone before announcement on a PA1
• Page:
  How to start a call from the PA1 using the keyboard inout PINs
• Page:
  Lync, SfB Extension and PIN Authentication with the PA-1
• Page:
  Multicast Audio
• Page:
  PA-1 Door Phone Application
• Page:
  PA1 - Accessory Cable
• Page:
  PA1 - EoL
• Page:
  PA1 - Filearchive - V8
• Page:
  PA1 - Firmware
• Page:
  PA1 - Keyboard pcb
• Page:
  PA1 - Relaysboard pcb
• Page:
  PA1 immediately dropping call
• Page:
  Public Announcement Devices
• Page:
  Public Announcement Firmware
• Page:
  Public Anouncement Features
• Page:
  Public Anouncement System FAQ
• Page:
  SNOM PA1 not playing ringtone
• Page:
  Snom PA1 TFTP Recovery Procedure
• Page:
  Supported amplifier for the PA1
• Page:
  Supported loudspeaker for PA1
• Page:
  Using Microsoft Task Scheduler to Run Script Daily to use PA1 as Bell or Ringer
• Page:
  What can you do with a PA1