Content
Release Date:Â 21. February 2025
Important Notes
- Please make sure you read ALL of the information below before installing the software on your device.
- Please install and test the software in your environment before mass deployment.
- We encourage you to read and follow our security advisories.
- This release does NOT directly include the OpenVPN feature in the firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.
- Please also read our Snom Product Lifecycle page carefully.
Increasing filesystem !!! READ FIRST !!! Key Information: We strongly encourage users with older software versions and affected devices to update to this version as soon as possible to ensure your device remains secure and up-to-date with the latest features and fixes. Chained Firmware Update Alternatively, you can use the chained firmware update method to ensure your phones will be able to update to future firmware versions. For this, you need to put together a combined download URL consisting of one of these ramdisk change updates snomD315-ramdisk-chained-update-r.bin and your target firmware version. E.g., if you want to update your D785 from version 10.1.169.x to firmware version 10.1.193.14 directly, you will need to provide the following chained firmware download link URL to the phone: The firmware update can either be initiated in the Web User Interface of the phone, or via auto-provisioning. Support of Product Security and Telecommunications Infrastructure (UK) and California IoT Security Law (SB-327) Snom increased the security requirements of all devices by enforcing to set passwords to support the legal requirements listed below. Please note that you cannot use a phone unless it has configured a password. For devices D1xx, D3xx, D7xx and D81x For devices D862 and D865 webserver_user_name The PhoneManager of D86x phones expects a password with state-of-the-art complexity. The password should contain small and capital letters, numbers, and special signs. This password complexity requirement does not apply to passwords that are set by provisioning. You can read more about SB-327 and PSTI regulations under the links.
snomD335-ramdisk-chained-update-r.bin
snomD385-ramdisk-chained-update-r.bin
snom715-ramdisk-chained-update-r.bin
snomD717-ramdisk-chained-update-r.bin
snomD735-ramdisk-chained-update-r.bin
snomD785-ramdisk-chained-update-r.bin
webserver_user_password
Known issues and limitations:
SAP-6326: The new Phone Manager (web user interface) is far advanced, esp. technically, compared to D1xx & D3xx & D7xx & D81x but does not yet support the entire scope of options & features known from its predecessor series
→ Workaround: You can still access the predecessor web interface via http:// IP address of the phone:3112 (please note the http instead of http*s* and the port 3112). Please check the current value of the setting webservertype to be set to http_https or http for this workaround. Be aware of the missing security if unencrypted HTTP is used!
XQI-6050: The Phone cannot connect to WiFi using WPS @D865
→ Workaround: Please use the PUI to connect to your WiFi network. We are working on a fix to get this issue resolved and built into the next release.
XQI-5065: Switching the Audio from the Handset to the Headset is sometimes not working while Bluetooth Headset is connected (Bluetooth headsets tests are still ongoing.) @D865
→ No workaround.
Changelog
Changes since release version 10.1.184.15
New features:
XQI-3104: MetaSwitch call history is synchronized @D86x #Metaswitch
XQI-3958: Managing certificates from the Phone Manager WUI @D86x
XQI-4182: D-Series is now able to change IP without reboot
XQI-4520: Transfer Fkey is extended with direct transfer possibility @D86x
XQI-4612: New action_received_sip_update setting, triggered on SIP UPDATE handling
XQI-4676: goto_monitor_state_on_line_activity / F_DIALOG is now supported @D86x
XQI-5161: WiFi configuration can be provisioned and configured @D86x
XQI-5458: New setting pretend_rport_received to handle missing rport in via
XQI-5550: New MB Fragments to accept / deny calls and send DTMF
XQI-5556: Gracefuly unregister SIP Account with challenge data during reprovision process
XQI-5579: Keys from Replacement Plan are available on Phone Manager WUI @D86x
XQI-5606: New ringer_headset_device values are added to allow the headset as ringer same if the preferred_audio_device is the speaker @D1xx @D3xx @D7xx @D81x
XQI-5616: New setting call_center_call_info_timeout for call center info @D7xx @D81x
XQI-5646: Support for the Spanish language @D862 @D865
XQI-5651: XSI contacts are browsable in the directory screen @D86x #Broadsoft
XQI-5652: CallList for Broadsoft was not available @D86x #Broadsoft
XQI-5655: Phone Firmware Upgrade Confirmation Message added @D1xx @D3xx @D7xx @D81x
XQI-5665: Keys from Replacement Plan are available on Phone UI @D86x
XQI-5736: DHCP Options 2, 6, 42, 66, 67, 120, 132, 133 are supported also over WiFi @D86x
XQI-5751: Support for Event park-info and Content type application/park-info+xml of PortSIP PBX
XQI-5802: Supporting doorbell images @D86x
XQI-5827: Call Completion can be enabled / disabled on the PUI @D86x
XQI-5881: Added show_clock setting under PUI menu 'preferences -> display' @D86x
Improvements and modifications:
XQI-4804: Line 1 of infobox uses the whole line when the time stamp is disabled @D86x
XQI-5095: Performance of Minibrowser Scrolling optimized
XQI-5183: Adjusted Daylight Saving setting for Mexico Mazatlán
XQI-5188: Reset missed call counter to zero upon missed call notification dismissal @D86x
XQI-5255: Display Call Center Infos @D7xx @D81x #Broadsoft
XQI-5632: Hide Next PFK Page Icon if setting smartlabel_hide_disabled_page is set to 'on' and the next PFK page is empty. @D7xx @D81x
Corrections:
XQI-2997: Clock can be hidden based on show_clock setting for @D86x
XQI-3849: Contact number types were incorrect
XQI-3873: Not able to change autoconnection flag if the WiFi network was disconnected or not in range @D865
XQI-3945: Call with 'Call completed elsewhere' cancelling reason was never registered as missed call
XQI-4414: Selected language was not highlighted correctly every time
XQI-5031: Reset of a VLAN configuration was not stored permanently
XQI-5039: No Broadcast audio when receiving 2 multicast with different priority
XQI-5171: @D7xx + @D7C replied to 192.168.0.1 ARP requests if no ip address was configured
XQI-5368: In some rare cases the From header was constructed without delimiter
XQI-5399: Deny List was not blocking incoming calls with PAI header and TelURI
XQI-5418: Challenging check-sync with authentication was not working for all SIP identities
XQI-5462: System Info PUI screen was always shown as wired connection with Rx/Tx stats even when using WiFi @D785 @D815
XQI-5545: m= lines in SDP were added instead of reusing disabled media lines.
XQI-5575: Minibrowser element MenuImage in IPPhoneMenu was not displayed in the original size on PUI @D86x
XQI-5576: Daisy chained @DxC sometimes had visual glitches @D7xx @D8xx
XQI-5577: Daisy chained @DxC sometimes failed firmware update @D7xx @D8xx
XQI-5581: ldap_telephonenumber_mapping did not take effect @D7xx
XQI-5582: After Wifi is enabled, autoconnect was changing back to on @865
XQI-5587: Headline of "Do not Disturb" was not translated @D86x
XQI-5588: In case of early media, without RTP no audio was sent
XQI-5647: When sip_stop_subscriptions_on_register_failure was set to 'on' (default) the subscription didn't follow the status and the address of the registration.
XQI-5650: DUT was not alerting when there is a directory entry with action url for the caller @D86x
XQI-5657: Now enforcing "ring_after_delay" to RingSplash case and "play_length" security as well as make RingSplash melody uninterruptible. #Broadsoft
XQI-5659: ldap_display_name was not used for sorting @D86x
XQI-5673: WUI logout button was not shown @D7xx @D3xx @D1xx
XQI-5679: Invalid default value was used (F_DIALED_LIST) @D86x
XQI-5694: RX paging could not be played until volume is increased @D7xx
XQI-5710: directory_display_order was not considered @D86x
XQI-5714: Known WiFi SSIDs with "Auto connect" disabled was not shown in the overview @D865
XQI-5743: On unsuccessful WiFi connection attempt the error messages weren't indicating the failure. @D86x
XQI-5763: When the NetworkRestartPopup was triggered, open menus were closed unexpected (returned to home/idle) @D86x
XQI-5775: Phone didn't register and no response after it was booted up when using DHCP Option 15 @D7xx
XQI-5780: Speed dial slot submenu - key ">" was shown but had no function @D86x
XQI-5788: Fixed reboot when VLAN ID = 0 via DHCP @D7xx
XQI-5804: Phone didn't keep sending registration request even when STUN server had no response
XQI-5813: The current assignment of pfkeys was not shown on the Phone Manager @D86x
XQI-5818: Was showing "Tone Scheme" on top-left corner abnormally while in welcome screen @D1x0 @D335 @D385
XQI-5820: Wrong user agent in fw download request @D81x
XQI-5838: XML Definition was not working for ContextKeys @D86x
XQI-5886: LDAP Client side sorting was not working on @D86x
XQI-5887: Failover identity was not failing over
XQI-5890: 503 failover/failback was not triggering a new subscribe
XQI-5920: Phone did not send certificate in https fw download request @D81x
XQI-5930: IPPhoneText was shown in two columns sometimes @D86x
XQI-5938: Firmware update download requests via HTTPS did not provide the intermediate CA of the client certificate @D1xx @D3x5 @D7xx
XQI-6031: Fix in BLF monitoring, special case. Phones B and C are monitoring A. B calls A. In that moment C picks up A. Now B should be connected to C, but was not.
Downloads
Firmware Files
Phone Model |
File Size |
SHA-256 Checksum |
Download Link |
|---|---|---|---|
D140 |
43.8 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD140-10.1.193.14-SIP-r.bin |
D150 |
43.8 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD150-10.1.193.14-SIP-r.bin |
D315 |
32.9 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD315-10.1.193.14-SIP-r.bin |
D335 |
39.4 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD335-10.1.193.14-SIP-r.bin |
D385 |
39.8 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD385-10.1.193.14-SIP-r.bin |
D713 |
40.1 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD713-10.1.193.14-SIP-r.bin |
D715 |
30.9 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snom715-10.1.193.14-SIP-r.bin |
D717 |
41.6 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD717-10.1.193.14-SIP-r.bin |
D735 |
43.0 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD735-10.1.193.14-SIP-r.bin |
D785 |
41.1 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD785-10.1.193.14-SIP-r.bin |
D787 (Americas only) |
45.8 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD787-10.1.193.14-SIP-r.bin |
D812 |
77.4 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD812-10.1.193.14-SIP-r.swu |
D815 |
77.5 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD815-10.1.193.14-SIP-r.swu |
D862 |
136.5 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD862-10.1.193.14-SIP-r.swu |
D865 |
137.9 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomD865-10.1.193.14-SIP-r.swu |
PA1P |
38.6 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomPA1P-10.1.193.14-SIP-r.bin |
SP800 |
136.0 MB |
|
https://downloads.snom.com/fw/10.1.193.14/bin/snomSP800-10.1.193.14-SIP-r.swu |
Customization Files
VPN Feature Updates
L2TP Feature Updates
Root CA Certificates
Phone Model |
File Size |
SHA-256 Checksum |
Download Link |
|---|---|---|---|
D140 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD140-10.1.193.14-CAs.csv |
D150 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD150-10.1.193.14-CAs.csv |
D315 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD315-10.1.193.14-CAs.csv |
D335 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD335-10.1.193.14-CAs.csv |
D385 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD385-10.1.193.14-CAs.csv |
D713 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD713-10.1.193.14-CAs.csv |
D715 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snom715-10.1.193.14-CAs.csv |
D717 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD717-10.1.193.14-CAs.csv |
D735 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD735-10.1.193.14-CAs.csv |
D785 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD785-10.1.193.14-CAs.csv |
D787 (Americas only) |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD787-10.1.193.14-CAs.csv |
D812 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD812-10.1.193.14-CAs.csv |
D815 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD815-10.1.193.14-CAs.csv |
D862 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD862-10.1.193.14-CAs.csv |
D865 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomD865-10.1.193.14-CAs.csv |
PA1P |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomPA1P-10.1.193.14-CAs.csv |
SP800 |
482.3 kB |
|
https://downloads.snom.com/fw/10.1.193.14/ca/snomSP800-10.1.193.14-CAs.csv |
Overview
Content Tools
Tasks
