Community

Content

Page tree

Hi,

we have installed various M900 DECT stations within our production facility. All DECT sender seem to work as the green lamp is activated. Unfortunalty, we cannot access the webinterface by enterin the assigned IP in the browser.
It says URL not found. However, ping is available and it was working beforehand.


Thank you

profilePicture

Jürgen

End user

Joined: 28.07.2023

5 Comments

  1. Snom Federico Rossi

    Hi,

    how do you configured the M900s? Manually or via provisioning? Do you performed a firmware upgrade?

    If you use a provisioning server, please try to add this code to your template:

    <settings>
    <global>
    <http_user>admin</http_user>
    <http_pass>test</http_pass>
    <http_basic_user>User</http_basic_user>
    <http_basic_pass>test</http_basic_pass>
    <http_engineer_user>Engineer</http_engineer_user>
    <http_engineer_pass>test</http_engineer_pass>
    <http_admin_user>Master</http_admin_user>
    <http_admin_pass>test</http_admin_pass>
    </global>
    </settings>



    Best regards

  2. End user Øyvind Skoglund

    Hi

    Did you find a solution for this? I have the same problem. Web-interface says "URL Not found" on some of the devices...

    I have configured all devices manually, no provisioning server..


    Thanks

  3. End user Kristof De Nul

    Hi, did you found a solution/workaround?
    I am having the same problem with a new M400 base.


  4. End user Thomas Parrotta

    Same here on a M400

  5. Registered Partner Csaba Galyas

    Hello,

    If an M900 base is not available, the likely network setup is incorrect. Maybe it's in a different Vlan, or it's a firewall setting problem. If it cannot be reached, it would be advisable to reset the M900 bases. It will probably be available with the IP address received from DHCP.