It seems that the base is out of range and is trying to synchronize. In this case,
I would try operating the base in the vicinity of one of the other bases to see if it connects there. Alternatively, you can set a handset to measurement mode with menu *47* to check the range. The attenuation to the next base must not be worse than -75dBm.
1 Comment
Silver Partner Guy Steinmann
Hi Guido,
It seems that the base is out of range and is trying to synchronize. In this case,
I would try operating the base in the vicinity of one of the other bases to see if it connects there.
Alternatively, you can set a handset to measurement mode with menu *47* to check the range. The attenuation to the next base must not be worse than -75dBm.
BR Guy