Content
D-SERIES
Phone Manager
Preferences →Appearance (Tab) →Interface Elements (Section) → Clear IVR digits after (s)
Phone User Interface
Not available
Initial Firmware Version
10.1.178.xxx
Only on D86x and D89x models
XML Configuration
<show_ivr_digits_timer perm="PERMISSIONFLAG">VALIDVALUE</show_ivr_digits_timer>
Description
This setting controls when the digits pressed during a connected call are cleared of the display or not cleared.
These digits are usually used to control IVR prompts and to enter user specific information e.g. calling card number, pin codes, credit card number, billing info etc. Refer to show_ivr_digits for details.
When set to 0 (i.e. disabled), the digits are seen for the whole time of that call.
Valid Values
0: disabled
1..10 seconds
Default Value
0
Overview
Content Tools
Tasks
