Content
ringtone/generator/
Introduction:
The possibility to change your Ringtone depends on the PBX - Phone system you are using. And that is the same with a custom ringtone.
Please be aware, that the ringtone have to be in a special lowband format and have to saved on a Webserver, because of Snom Phones just use a Link to custom Ringtone.
Please see Details below.
Configuration
To set the ringtone for a specific identity, change the following settings on the phone´s web interface:
If you don´t know how to get into your Snom Phone Web User Interface, please have look here: Entering Snom Deskphone Web Interface - WUI
General for all calls to identity
- Identity → Login: Ringtone: choose Custom Melody
- Identity → Login: Custom Melody URL HTTP URL pointing to an appropriate wav file, i.e. ''http://downloads.snom.com/documentation/melody1.wav''
Note: If your custom melody is not played as expected, it might mean that your provider is sending another melody URL in the Alert-Info header of the SIP INVITE message. See section Which melody has priority below.
For specific contacts configured in the phone directory (address book)
The contacts in the address book can be set with a special group, for example you can have contact Mom in category Family:
Then you can configure the custom melody for all contacts of type Family under Preferences → Audio → Directory Ringtones:
Note: If your custom melody is not played as expected, it might mean that your provider is sending another melody URL in the Alert-Info header of the SIP INVITE message. See section Which melody has priority below.
For calls with specific header
The PBX can send the SIP Alert-Info header inside the SIP INVITE method sent to phones in order to choose a certain ringtone reachable to the phone over http (custom melodies). Here is an example of the SIP alert-info header in a call that would ring using custom melody http://downloads.snom.com/documentation/melody2.wav :
Alert-Info: <http://downloads.snom.com/documentation/melody2.wav>
Which melody has priority
If the user has set a melody and the server is sending the Alert-Info header as well, the Alert-Info header has higher priority. This can be changed by setting the following setting to 'off': Advanced -> Audio -> Alert Info playback
Requirements
The wav file should comply to the following requirements:
- Encoder: PCM, 8 KHz, 16bit mono.
- The time for loading the file should not be longer then 3 seconds.
- Size < 250 KByte depending on the available free memory of the phone. On snom 3xx device might be < 150 KByte.
Ringtone Generator
- Online you can find software to modify your audio file to be compliant with the requirements above
- Alternatively on Linux/Unix you can use the tool ffmpeg to convert a sound file
ffmpeg -i <infile.(wav/mp3)> -acodec pcm_alaw -ac 1 -ar 8000 <outfile>.alaw.wav
Note: if the resulting melody sounds weird you can try without the extra encoding by removing parameter "-acodec pcm_alaw":
ffmpeg -i <infile.(wav/mp3)> -ac 1 -ar 8000 <outfile>.alaw.wav
Further Information
Related articles
Overview
Content Tools
Tasks
