How to factory reset the M200 SC , M215 SC

Resetting the DECT base stations M200 SC/M215 SC is very easy. Simply use a paper clip or something similar and press the reset button for 15 seconds. 
Once you release the Reset button after the time has elapsed, the two LEDs on the front of the base will flash alternately for a short time. All handsets that were previously connected will now ask you to connect them to a base.

M200 SC/M215 SC

• Page:
  DECT MSC-Series How-to
• Page:
  Determining the IP address of your DECT M-SC-Series base
• Page:
  Entering Web Interface - WUI of your Snom DECT-M-SC Series Base
• Page:
  How to configure VPN on a M200 SC - M215 SC
• Page:
  How to factory reset the M200 SC , M215 SC
• Page:
  How to migrate LDAP settings from a deskphone to M215 SC or M200 SC
• Page:
  How to Register a M15 SC to the M200 SC
• Page:
  How to setup a M200 SC - DECT Base
• Page:
  M200 SC - Telephony Features
• Page:
  Setting up a Snom DECT Base of the M-SC-Series on a FritzBox