PA1 - Accessory Cable

The snom PA1 accessory cable set has 4 cables to connect keyboard and I/O pins.

The cables can be used to connect relays or other actors. You can connect for example a keyboard.

This set can be purchased from your local distributor.

• Page:
  Archive - PA1
• Page:
  Firmware version 10.1.101.11 certified with Telepo 5.3
• Page:
  How to connect to the PA1's Default IP Address 192.168.0.2
• Page:
  How to play a tone before announcement on a PA1
• Page:
  Lync, SfB Extension and PIN Authentication with the PA-1
• Page:
  Multicast Audio
• Page:
  New official deskphone firmware release 10.1.119.10 published
• Page:
  New SRAPS version 3.6.0 out now - including new File Manager feature
• Page:
  PA1 - Accessory Cable
• Page:
  PA1 - Keyboard pcb
• Page:
  PA1 - Relaysboard pcb
• Page:
  Public Announcement Firmware
• Page:
  Public Announcement How-to
• Page:
  Public Anouncement Features
• Page:
  Public Anouncement System FAQ
• Page:
  Snom PA1 TFTP Recovery Procedure
• Page:
  Snom PA1+/PA1P TFTP Recovery Procedure