After upgrading my DECT base to 400B02 my M65 cannot register anymore

Solution

In case your M65 has the hardware revision RC50 (check the label under the battery) will not be able to register to the base with version 400B02.

To solve the issue, you should update the base to the version 400B04 or later. After the update, the handset will be able to register.

• Page:
  Adding M5 repeaters in a multicell environment
• Page:
  After upgrading my DECT base to 400B02 my M65 cannot register anymore
• Page:
  After upgrading the base to version 400B02 the provisioning via HTTPS/TLS isn't working anymore
• Page:
  Assign a handset to a SIP account on a M300
• Page:
  Attended or blind call transfer of the 2nd call results in merging the 1st and 2nd incoming call
• Page:
  Can I daisy-chain M5 DECT repeaters
• Page:
  Can I install a mixed system with M700 and M900 together
• Page:
  Can I register a 3rd party DECT handset or repeater to a Snom M300,M700,M900 base station
• Page:
  Common faults on M-series DECT base stations: causes and solutions
• Page:
  Configuring multiple SIP Extensions with an M-series DECT handset
• Page:
  DECT - 1. Multicell Deployment Guide
• Page:
  DECT - 2. Physical installation
• Page:
  DECT - 3.0 Multicell setup
• Page:
  DECT - 3.1 Add Extensions
• Page:
  DECT - 4. Site Survey
• Page:
  DECT - 5. Measuring with DECT Discovery Mode
• Page:
  DECT - 6. Best Practises
• Page:
  DECT - Beacons How-To
• Page:
  DECT M-Series How-to
• Page:
  DECT M-Series Provisioning
• Page:
  DECT M100 KLE How-to
• Page:
  DECT M500 How-to
• Page:
  DECT MSC-Series How-to
• Page:
  DECT Solution FAQ
• Page:
  DECT Solution How-to