Is my call held on the A100M headset when I disconnect the Quick Release connection

The Quick Release connection to the Snom Headsets "A100M" and "A 100D" are used for fast connection and disconnection at classic call center workstations.

• If the connection is disconnected during a call, nothing happens.
• The call is neither put on hold nor terminated. It simply continues to run.
• After reconnecting, the call can be continued.

• Page:
  A150 / A170 DECT Encryption
• Page:
  A190 - Basics
• Page:
  ACPJ - A100 M/D Adapter Cables
• Page:
  ACPJ25 - A100 M/D Adapter Cables
• Page:
  ACUSB - A100 M/D Adapter Cables
• Page:
  Headsets How-to
• Page:
  How can I switch the call between the A190 and an Mxxx handset when paired
• Page:
  How do I do that with the home office
• Page:
  How to assign functions to the A190 buttons
• Page:
  How to configure the Voice prompt on the A190 headset
• Page:
  How to send the ringtone to a Bluetooth Jabra headset
• Page:
  How to setup the A170 Earpiece Ringer
• Page:
  How to use snom DECT devices including snom A190 with 3CX WebClient
• Page:
  Is my call held on the A100M headset when I disconnect the Quick Release connection
• Page:
  Misc FAQ
• Page:
  Misc How-to
• Page:
  Misc PBX How-to
• Page:
  USB HID
• Page:
  What is the difference between settings_refresh_timer and prov_polling_period? How do they relate to each other?
• Page:
  Why can't I login to SRAPS