Content
Resetting the DECT base stations M300, M700 and M900 is very easy. Simply use a paper clip or something similar and press the reset button for 10 seconds or until the LED changes to a solid red light.
Please try to release the button after 10 seconds and the base station will most likely start the reset process (which can take up to a few minutes).
M300
M700
M900
Reset via Web Interface
All base stations can also be reset using the web interface if a hardware reset isn't possible (the base station isn't physically reachable, for example).
You can head into the Management menu into the WUI and scroll down to the bottom, here there is a "Default Base Station" button which will factory reset the device when pressed, as in the screenshot below.
Further Information
Related articles
Overview
Content Tools
More service from Snom
Copyright © 2022 Snom Technology GmbH. All rights reserved.