Snom Service Hub

Content

Page tree

For an overview of the switchable PINS please have a look at the following article: PA-1 Door Phone Application

In order to realize this behaviour, you need to:

  1. Set the device with a SIP extension 
    [Setup -> Identity -> Login Information]



  2. Go to “Action URL Settings” tab and fill “Incoming Call” with the following string:
    http://127.0.0.1/dummy.htm?pa1_pin3=on&settings=save

     

    This setting will make an HTTP Request to the PA1 in order to enable Pin3 when the phone has an incoming call

  3. Go to “Action URL Settings” tab and fill “On Connected” and "On Disconnected" with the following string:
     http://127.0.0.1/dummy.htm?pa1_pin3=off&settings=save


    This setting will make an HTTP Request to PA1 in order to disable Pin3 when the phone answer or not


  4. In  “Action URL Settings” tab fill “Setup finished” with the following string:

http://127.0.0.1/dummy.htm?pa1_pin3=off&settings=save

 

This will set pin1 to off when the device boots up

If the settings http_user and http_pass are configured, you have to include the credentials into the URL like the following example: 
http://username:password@127.0.0.1/dummy.htm?pa1_pin3=on&settings=save

Further Information


Related articles