Content
Introduction
This page describes how to set up Paging Groups on the M500. A paging group is a list of registered handsets/desksets that can receive a page. For example, you can set up paging group "Sales" for handsets 1 and 2, and paging group "Warehouse" for handsets 3, 4 and 5.
You can configure up to six paging groups via the WebUI or provisioning.
When you have configured your paging groups, they will be available for selection on the Paging screen of the M55, M56 or M58. Select the paging group, and press Page to send a page to the handsets/desksets configured in that paging group.Â
           
Configuring Paging Groups
WebUI
- Go to the System → Paging Configuration page.
- On the Select Page Group list, select a paging group.
- Enter a Page Group Name (for example, "Warehouse").
- Select the check boxes of the handsets/desksets that you want to be included in the paging group.
- Click Save.
Provisioning
Import the following setting values to M500 via provisioning for each paging group you want to configure.Â
- Substitute 'x' with the paging group number (1-6).
- Substitute <name> with the name of the paging group (for example, "Warehouse").
- Substitute <members> with a comma-delimited list of registered cordless device index numbers (1-48) to be included in the paging group.
page_zone.group.x.name = <name> page_zone.group.x.members = <members>
For more information about these settings, see page_zone.group.x.name and page_zone.group.x.members.
Further Information
Related articles
Overview
Content Tools
Tasks
