-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
Release Notes
M5 - 480B05 Release - 07 Oktober 2020
New features:
- Repeater chaining is now supported
BS510B01 HS510B01 Release - 25 September 2020
Delta to V501B1/B2
- Base Station releases V510B1should be used with Repeater releases V480B5 or later.
- Headset Version is V500B1.
- A190 might require an update of the voice prompts which can be done through dect.snom.com as shown on the picture below.

Features added:
Bug fixes:
- DECT-810 - Transferred call drops after 30 seconds
- DECT-700 - Directory full name cut on display (M70, M80, M90)
- DECT-782 - Resolved Non-Compliance RFC 3261 Clause 17.2.2 Non-INVITE Server
- DECT-785 - pp_menu_hide parameters not updated
- DECT-681 - Unexpected Reboots Error:92
- DECT-XXX - Wired headset could cause handset to reboot
- DECT-XXX - Handset issues LDAP connection failed though connection was ok
- DECT-XXX - DNS failover memory leak was fixed
- Known issues:
Simple XML Minibrowser does not handle softkey in XML properly - Simple XML Minibrowser invalid combination when attempting to remove extensions from URL string
BS501B01 HS501B02 Release - 01 September 2020
Delta to V500B1
- Base Station releases V501B1should be used with Repeater releases V480B5 or newer.
- Release version for base stations is V501B1, Handset version is V501B2
Features added:
- DECT-623 LLDP-MED is set to "enabled" on default
- DECT-467 Add OPUS support to M900 (needs A900 DSP module)
Bug fixes:
- DECT-708 call is not forwarded when "Diversion Inhibited" is enabled with Broadsoft
- DECT-704 can hold call when session timer is enabled with Broadsoft
- DECT-628 M85 does not trigger "No movement alarm" when put in charging cradle
Known issues:
- BV32 codec with handover not working
BS500B01 HS500B01 Release - Juli 2020
Delta to V450B13
Features added:
- DECT-688 Noise Cancelling option (M85), Noise reduction option on (M70, M80, M90)
- DECT-665 LLDP-MED can be set through provisioning
- DECT-685 TLS outbound support (Explicit Routing)
- DECT-559 Longer XSI credentials
- DECT-662 Slovak language for Handsets
- DECT-605 Czech language for Handsets
- DECT-459 Push-to-talk (PTT) on Handsets
- DECT-669 Increased provisioning file size (M300: 700KB, M700: 700KB, M900: 1MB)
- DECT-337/DECT-650 MOH server with TLS
Bug fixes:
- DECT-696/DECT-697 Issues with Spanish and Russian language resolved
- DECT-654 Alarm key did not trigger alarm when delay was configured
- DECT-549/DECT-578 Phone directory does not modify numbers anymore with starting "+" when provisioning is used
- DECT-664 LAN synchronization could not be configured using provisioning (M900)
- DECT-703 Context key was non-functional during transfer
- DECT-637 Certain server requests were sent in a loop (M300)
- DECT-646 In certain situations there was static noise on incoming calls
- DECT-684 XSI server was not correctly synchronized in Multi-cell set-up
- DECT-681 Unexpected Reboot 92
- DECT-799 Backlight flickering when message LED is active
BS450B13 HS450B13 Release - December 2019
Bugfixes:
New features:
Known issues:
DECT-684 No synchronization on the xsi_server values @M700
DECT-646 DECT: Static noise with incoming call
- DECT-686 Unexpected reboots Error:59
DECT-681 Unexpected Reboots (Error 92) @M900
- DECT-696 Handsets: Russian translation of menu / info messages uses wrong charset
- DECT-697 Handsets: Spanish info message ambiguous
BS450B11 HS450B11 Release - September 2019
Bugfixes:
DECT-640 - FIX: M700, M900: Remove dash sign from called numbers
DECT-647 - FIX: M700, M900: Broadsoft XSI wrong downloaded URL (XSI directories and Call Logs)
DECT-625 - FIX: M700: Fixed reboot during handsets fw upgrade
DECT-639 - FIX: M700, M900: XSI and LDAP addressbook cannot be activated without manual intervention from web UI
- DECT-632 - FIX: M700, M900: Wrong SIP request URI in Record-Route (strict routing) scenario
- DECT-629 - FIX: M700, M900: No audio after hold INVITE or reINVITE
- DECT-641 - FIX: M700, M900: Broadsoft XSI Caller-ID blocking: SIP authentication not working
- DECT-615 - NEW: LDAP number lookup can be disabled through provisioning
BS450B08 HS450B05 Release Candidate - April 2019
Bugfixes:
DECT-614 - FIX: M700: Fixed unexpected reboots and stability issues
DECT-625 - FIX: M700: Fixed reboot during handsets fw upgrade
DECT-617 - FIX: Provisioning using file inclusiong (XML tags <setting-files><file>) is not working
DECT-504 - FIX: No audio after call from group with music (RTP collision)
Known Issues:
- DECT-629: No audio after hold INVITE or reINVITE
- DECT-632: Wrong SIP request URI in Record-Route (strict routing) scenario
- DECT-639: XSI and LDAP addressbook cannot be activated without manual intervention from web UI
BS450B07 HS450B05 - Not Released
Bugfixes:
- DECT-612 - FIX: Downloaded tbook format address book no longer work
- DECT-607 - FIX: Certificates not used on M300/M700 with device out of the box 410B4
- DECT-571 - FIX: SRTP: No audio after reINVITE
- None - FIX: Central Dir not changed when using provisioning file
BS450B06 HS450B05 - Not Released
Bugfixes:
- DECT-594 - FIX: M700 does not send Session-Refresh reINVITE
BS450B05 HS450B05 - Not Released
Known Issues:
- None: Hide number sub menu not sync
New Features:
- None - NEW: HS menu control via provisioning
- DECT-528 - NEW:: Support alarm time-out configurable in seconds
- DECT-527 - NEW: Support different alarm tones/audibles
- DECT-489 - NEW: Make XSI addressbook type provisionable @broadsoft
- DECT-488 - NEW: Make XSI username and password provisionable @broadsoft
- DECT–487 - NEW: Enable sip name as user name for LDAP feature
- DECT-460 - NEW: Support of LDAP over TLS
- DECT-287 - NEW: Expanding SIP Alert-Info Header Supports
- None - NEW: Comfort Noise packets support
- None - NEW: DECT tree save / recover button on the webpage
- DECT-568 - NEW: Make XSI Caller-ID blocking provisionable @broadsoft
Bugfixes:
- DECT-511 - FIX: Improved primary failover alogorithm
- DECT-431 - FIX: SRTP: auth_tag_length has no valid setting value
- DECT-367 - FIX: XSI Sip Authentication does not work with different xsi username @broadsoft
- DECT-601 - FIX: Ethernet frames bigger than 1514 bytes are discarded in VLAN tagged scenario
- DECT-571: SRTP: No audio after Seq goes from 65535 to 0 and reINVITE
- DECT-569 - FIX: Timezone and dst settings are missing from the XML configuration
- DECT-565 - FIX: No audio after call transfer with codec change
- DECT-564 - FIX: SRTP: DECT does not play SRTP audio after a while
- DECT-563 - FIX: Hold/un-hold via hold and talk SIP events ends with a no audio
- DECT-562 - FIX: Codec re-negotation ends in no audio
- DECT-551 - FIX: Crash when deleting device identity certificates
- DECT-550 - FIX: M700 does not send ACK if 200 OK contains Record-Route
- DECT-543 - FIX: Security section of web GUI gets messed up when uploading client certificate X509v3 with key length of 4096
- DECT-540 - FIX: M300 crashes when uploading client certificate
- DECT-532 - FIX: Provisioning: RTP ports cannot be changed
- DECT-509 - FIX: using \\ characters into firmware settings broke the firmware menu
- DECT-481 - FIX: Alarm not working after Declined call
- DECT-461 - FIX: Handset's directory Search returns only mobile number
- DECT-384 - FIX: M700 reboots when place calls on hold with g729 and SRTP - SRTP Auth enabled
- DECT-277 - FIX: Wrong user_srtp value
BS440B03 HS440B03 - Not Released
New Features:
- DECT-544 - NEW: Support for TLS 1.2
- None - NEW: M25 messaging support
- DECT-521 - NEW: Hide number via XSI @broadsoft
Bugfixes:
- DECT-495 - FIX: Unable to pair Konftel 300Wx handset
- DECT-501 - FIX: Device does not update the Session-Expire header in case of 422 SIP error
- DECT-497 - FIX: Support XSI SIP Authentication for Address book @broadsoft
- DECT-456 - FIX: SIP stack cannot handle dual RTP media description
- DECT-403 - FIX: Wrong ringing tone with Ireland country
BS420B01 HS420B07 - Not Released
New Features:
- DECT-464 - NEW: Feature Request uaCSTA SIP Support
Bugfixes:
- DECT-473 - FIX: M700 does not allow to provision Spanish Language
- DECT-469 - FIX: Central Directory removed from all the handsets and isn't recovered
BS410B14 HS410B11 - Released
Known Issues:
- None: Hide number sub menu not sync
Bugfixes:
- None - FIX: Configuration download during boot will not be shared
BS410B13 HS410B11 - Not Released
Known Issues:
- None: Hide number sub menu not sync
Bugfixes:
- None - FIX: RSSI value from a good value (-6xdBm) to -Infinity
- None - FIX: Power toggle with enabled Call Forwarding may result in double SIP registration.
- None - FIX: Handle Connection Lost from central base station
BS410B11 HS410B11 - Not Released
Known Issues:
- None: Hide number sub menu not sync
New Features:
- None - NEW: Backoff mechanism for provisioning.snom.com
- None - NEW: Remote removal of handset / use of device configured
Bugfixes:
- None - FIX: resets at "Forced reboot" cmd - error 41
- DECT-557 - FIX: XSI client: malformed communication
- None - FIX: Importing Germain chars to handset
- None - FIX: Unexpected reboot cause 5
BS410B10 HS410B07 - Not Released
Known Issues:
- None: Hide number sub menu not sync
Bugfixes:
- DECT-431- FIX: SRTP: auth_tag_length has no valid setting value
- DECT-277 - FIX: Wrong user_srtp value
- None - FIX: Issues with base reboot with Error 41
- None - FIX: Improved multicell stability
- None - FIX: Improved muilticell error logging and reporting
BS410B09 HS410B07 - Not Released
Known Issues:
- None: Hide number sub menu not sync
New Features:
- DECT-541 - NEW: M300/M700 does not support RFC 2617 (qop)
BS410B07 HS410B07 - Not Released
Known Issues:
- None: Hide number sub menu not sync
New Features:
- DECT-521 - NEW: Hide number via XSI
BS410B06 HS410B06 - Not Released
Bugfixes:
- DECT-522 - FIX: M25 Conf. key not shown on V410B3
New Features:
- None: - NEW: Hide number setting
BS410B04 HS410B3 - March 2018
Bugfixes:
- DECT-486 - FIX: Using SRTP can cause DECT base crash
- DECT-477 - FIX: Configuring the VLAN priority breaks the multi cell communication
- DECT-484 - FIX: Missing REFER in transfer scenario
- None: The handset stores only a few text Messages
- None: The handset shows only the name name, doesn't show the number of caller/callee
Repeater
Release Notes
RPV39
New Features:
- Support for repeater statistics
- Repeater syslog status improved
- Improved busy handling
-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
-
Page:
-
Page: