How to disinfect my DECT handset

1. Only use disinfectants that are based on Isopropyl Alcohol (IPA) or denatured ethanol up to a concentration of 85%. The use of incorrect disinfectants can damage the device. For details, please refer to our "Cleaning Guide" (see below).
   
   

2. Never apply the cleaning agent directly to the handsets; always dampen a soft cloth and use that to clean the handset.

Download your Cleaning Guide

• PDF File
  Others > Snom_M90_Cleaning-Guide_de.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_en.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_es.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_fr.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_it.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_pl.pdf
• PDF File
  Others > Snom_M90_Cleaning-Guide_ru.pdf

• Page:
  Adding an M5 or M6 repeater in a multicell environment
• Page:
  After upgrading my DECT base to 400B02 my M65 cannot register anymore
• Page:
  After upgrading my DECT multicell system, I can't access the WUI anymore
• Page:
  After upgrading the base to version 400B02 the provisioning via HTTPS/TLS isn't working anymore
• Page:
  Assign a handset to a SIP account on a M300
• Page:
  Attended or blind call transfer of the 2nd call results in merging the 1st and 2nd incoming call
• Page:
  Can I daisy-chain M5 DECT repeaters
• Page:
  Can I install a mixed system with M700 and M900 together
• Page:
  Can I register a 3rd party DECT handset or repeater to a Snom M300,M700,M900 base station
• Page:
  Common faults on M-series DECT base stations: causes and solutions
• Page:
  DECT Solution FAQ
• Page:
  Difference between DECT and configuration synchronization
• Page:
  Do the M300,M700,M900 support GAP
• Page:
  Dropped connections and failed handset handovers in a DECT multi-cell
• Page:
  Dropped SIP registrations on DECT multicell
• Page:
  End of Support for the M700 on 3CX V18
• Page:
  How can I trigger a settings sync on a DECT M300,M700,M900
• Page:
  How to disinfect my DECT handset
• Page:
  How to factory reset an M10 KLE handset
• Page:
  How to factory reset an M15 SC handset
• Page:
  How to factory reset an M18 KLE handset
• Page:
  How to factory reset an M55, M56, M58 M500 handset
• Page:
  How to get a Log from the DECT base
• Page:
  How to get a SIP trace from the DECT base
• Page:
  How to use the pound key to debug in-a-call issues
• Page:
  Is it possible to assign more than one DECT handsets to an identity
• Page:
  Is it possible to assign more than one identity to a Snom DECT Handset
• Page:
  Is the differentiated ringtone feature supported on M300, M400, M700, M900
• Page:
  Is the Snom M85 ATEX 2014,34,EU compliant a for use in potentially explosive atmospheres
• Page:
  M900 and LLDP protocol
• Page:
  My DECT M-Series base is resetting the ethernet link periodically
• Page:
  My M700,M900 refuses to join the DECT chain
• Page:
  Snom products lifecycle
• Page:
  Troubleshooting Audio Issues DECT M700,M300,M85,M65,M25
• Page:
  What DECT frequency bands are supported by M-series base stations
• Page:
  What does the cross (X) icon means on a DECT handset?
• Page:
  What does the error - Insufficient capacity or Insufficient resources - mean
• Page:
  What does the error -Multi cell system version conflict , Provider conflict , Primary conflict IP- mean?
• Page:
  What is the meaning of the LED colours on the M300, M700 and M900
• Page:
  What is the syntax of the LDAP filter on the M300,M700,M900
• Page:
  Why am I not able to add a repeater to a M300, M400, M700 or M900
• Page:
  Why did the central address book icon disappear on my handset
• Page:
  Why does my local central directory does not import contacts from the .txt file?
• Page:
  Why does the configured SIP Server change after I reboot a M300, M700, M900
• Page:
  Why my Snom M65 doesn't show the transfer Key