Software Upgrade M-Series (M700, M900)

This How-To is intended for administrators of DECT Multicell Systems running either M700, or M900 or mixed environments and requires understanding of the system and the Snom M-Series products.

Index:

Preconditions and preparation

• Page:
  DECT - 1. Multicell Deployment Guide
• Page:
  DECT - 2. Physical installation
• Page:
  DECT - 3.0 Multicell setup
• Page:
  DECT - 6. Best Practises
• Page:
  DECT - M700, M900 - Activate Multicell Mode
• Page:
  DECT Multi Cell Installation How-to
• Page:
  How do I configure a M300, M700, M900 with the SIP Account from my Provider
• Page:
  How to configure RingCentral SIP settings on an M300, M700 and M900
• Page:
  How to enter M300, M700, M900 - Web Interface
• Page:
  How to factory reset the M300,M700,M900
• Page:
  How to install the A900 DSP module for the M900 DECT base station
• Page:
  How to install the G729 DSP module A729 for the M700 base station
• Page:
  How to load a SIP client certificate on the DECT base M300, M700, M900
• Page:
  How to rebuild the DECT tree after a base station removal or failure
• Page:
  How to reset an M6 repeater
• Page:
  How to update M300,M400,M700,M900 DECT Base Station manually
• Page:
  How to update M300,M700,M900 and handsets via Network
• Page:
  How to upload custom certificates on an M900,M400 via provisioning
• Page:
  How to use a Syslog Server with the DECT base M300,M700,M900
• Page:
  How to use the Central Directory on a Snom M300,M700,M900 DECT base
• Page:
  How to use the dial plan on M400 and M900
• Page:
  How to use the LDAP central directory on M300, M700, M900 DECT base
• Page:
  How to use the Local Central Directory on M300, M700, M900 DECT base
• Page:
  Registering the Konftel 300Wx with the Snom DECT base M300, M700, M900
• Page:
  Setting up a DECT M-Series Base
• Page:
  Switching to Peer-to-Peer Multi-cell Configuration